Programming instructions

Mailboxes
[MAILBOX SCREEN]
CMP L-1’
BOX[
-1 I
NAME LAST FIRST....
STREET...
P.O.BOX..
CITY.....
STATE.... ZIP:
TELEPHONE -
- -
ATR/CRT TYPE ...... [-].......NE W USER TUTORIAL. [-]
OUT DIAL ALLOWED..[- ] y/n
CCR INPUT ...... ..[ ]
OUT DIAL AREA CODE[
-3
DEPARTMENT ...... ..[
-3
ATTEND EXT
SPELL NAME ...... ..[
-GUEST
SECRETARY
GUEST 2
GUEST 3
GUEST 4
GUEST 5
GUEST 6
GUEST 7
GUEST 8
GUEST B
BOXES-
=[FB]Clear [Fb]Save [FG]Del [F'I]Scroll [FI]Find [FQ]Prev [FlO]Next
[Esc]Quit :
Figure 3-5 Mailbox Set-up Screen
3.3.1 MAILBOX TYPES
The Mailbox Type defines the function of a mailbox. A number of mailbox types have been added to
the system since software release 1.3.3. The following box types are available in the system:
Type 1
Type 2
Type 3
Type 4
Type 5
Type 10
Type 11
Type 12
Type 13
Type 14
is a regular subscriber mailbox.
is a subscriber mailbox, however, after the mailbox greeting is played, there are no sys-
tem prompts, just the tone to begin recording.
is a subscriber mailbox with prompts, however, the system greeting is played before the
mailbox greeting. This is used for DID calls to notify the caller of company reached in
addition to the subscriber’s greeting.
is a subscriber mailbox, however, the system greeting is played before the mailbox greet-
ing, there are no system prompts, just the tone to begin recording. This is used for DID
calls to notify the caller of company reached in addition to the subscriber’s greeting.
is a subscriber mailbox, however, after the mailbox greeting is played, the caller is given a
choice of dialing 1 to leave a message, or 0 to reach the operator. If nothing is dialed,
the caller is transferred to the operator.
is a system administrator mailbox.
calls to mailboxes with this type are routed to the voice mail entry point for subscribers.
This type is used with Custom CalI Routing.
calls to mailboxes with this type are routed to the voice mail entry point for non-sub-
scribers. This type is used with Custom CalI Routing.
routes calls to the entry point for auto attendant spell by name, however, there is no sys-
tem introduction.
this is a special type used when Custom Call Routing is to be used as an auto attendant.
The DTMF digit used in CCR to reach a mailbox with this type is taken as the leading
digit in the extension number. The system waits for the remaining digits to be dialed
(based on the number of digits in an extension number from the PBX Parameters
screen) then transfers the call to that extension.
INFOSTARIVXZ
3.9