Programming instructions
Mailboxes
5. Enter the new value, and press the RETURN key if the value does not fill the field.
6. Program the remaining fields with the values desired for this class of service. The cursor moves to the
next field when a field is full. If the desired value does not fill a field, press the RETURN key.
7. When all fields are complete, press the FS key. The system prompts for confirmation. Press Y to save
the information, and N to return to the screen and change something.
8. Press the ESCAPE key to return to the
Main Menu.
3.2.3 DELETE CLASSES OF SERVICE
You may delete any of the established classes of service.
From the
Main Menu
press the Fl key, then press 6. The
Class
of
Service
programming screen ap-
pears. See Figure 3-1. The cursor should be in the COS field.
1. Enter the 3-digit number of the class of service you wish to delete. The system prompts for confirma-
tion. If the system informs you “Information not found,” the COS number entered does not exist.
2. Press Y. The present programming for this COS appears.
3. Press the F6 key. The system prompts for confirmation.
4. Press Y. The COS is deleted.
5. Press the ESCAPE key to return to the
Main Menu.
[CLASS OF SERVICE SCREEN]
CLASS OF SERVICE [-I NAME:
A)
B)
C)
MAXIMUM NUMBER OF MESSAGES......................60 [
MAXIMUM MESSAGE LENGTH.........................120
[
z-3
SECONDS
MAXIMUM SILENCE DURING RECORDING.................4 [ ] SECONDS
SECONDS
SECONDS
DAYS IN ADVANC
.I
lFIF0 2LIFO
D) MINIMUM MESSAGE LENGTH ......................... ..O
E) GREETING MAXIMUM LENGTH.........................6 0
F) SPECIFIED DELIVERY TIME UP TO...................6 0
G) MAXIMUM SPECIFIED DELIVERY TIME MESSAGES........2 0
H) REVIEW METHOD FIFO/LIFO ........................ ..l
I) GUESTS 1-O ..................................... ..q
J) KEEP NEW MESSAGES...............................3 0
K) KEEP SAVED MESSAGES.............................1 0
L) PERSONAL GROUPS.................................1 8
M) DESTINATION.....................................2 5
N) OK TO SEND MESSAGE TO SYSTEM GROUP LIST ........ ..Y
0) NOTIFICATION OF AUTOMATIC MESSAGE ERASE
........ ..Y
P) AUTOMATIC ALERT OF MESSAGE ERASE IN ADVANCE
.... ..O
Q) NOTIFICATION OF NON RECEIPT OF MESSAGE AFTER ... ..l
R) END OF RECORDING ALERT IN ADVANCE...............1 0
S) TYPE OF OUT DIALING
............................ ..O
DAYS
DAYS
Y/N
DAYS
DAYS
SECONDS
T) SEND MSG TAG (l:CONF 2:PRE 3:PROOF 4:SDT) IN..1234
[
---I OUT 1-1
U) MWI RESET OPTION.................................1
1-I
: [FB]Clear [FB]Save [FG]Del [F7]Scroll [FS]Find [FO]Prev [FlO]Next [Esc]Quit =
Figure 3-3 Class Of Service Programming Screen
3.6
INFOSTARIVX2
System Administrator’s Manual
revised 7191