Programming instructions

Mailboxes
If this field contains a 2, each new message received in the mailbox will cause the MWI turn on
to be sent to the telephone system. The MWI turn off code will be sent to the telephone system
a valid mailbox access code has been entered for the mailbox.
code
after
3.2.1 ESTABLISH CLASSES OF SERVICE
Classes of Service are numbered from 001 to 999. The INFOSTAWVX2 has been shipped with two
predefined classes of service, one for standard mailboxes (COS 100) and one for the system adminis-
trator’s mailboxes (COS 700). You may establish other classes of service, for needs that have not
been predefined.
From the Main Menu press the Fl key, then press 6. The Class of Service programming screen ap-
pears. See Figure 3-l. The cursor should be in the COS field.
4. Enter the 3-digit number of the class of service you are establishing. It is recommended to use a
number between 10 1 and 199. The system informs you that the COS does not exist, “Information not
found. ”
5. Press the RETURN key. The cursor moves to the Name field.
6. Enter a name for the new class of service up to 34 characters, then press the RETURN key. The cursor
moves to the first field.
7. Enter the desired value, then press the RETURN key.
8. Program the remaining fields with the values desired for this class of service. The cursor moves to the
next field when a field is full. If the desired value does not fill a field, press the RETURN key.
9. When all fields are complete, press the F5 key to save the screen. The system prompts for confirma-
tion. Press Y to save the information, and N to return to the screen and change something.
10. After the first Class of Service has been saved, the screen does not clear. This is so the existing values
can be used as a model for the next.
NOTE: Be careful not to overwrite an existing Class of Service and then save it.
NOTE: The pre-defined Class of Service (100) can be used as a model. Enter 100 for Class
of Service, then save it. The parameters remain on the screen. Enter the number of the
Class to be defined, and continue from step 6.
3.2.2 MODIFY CLASSES OF SERVICE
You may change any of the established classes of service (including the predefined ones) to meet your
own subscriber’s needs by simply entering new parameter‘s in place of existing values.
From the Main Menu press the Fl key, then press 6. The Class of Service programming screen ap-
pears. See Figure 3-l. The cursor should be in the COS field.
1. Enter the 3-digit number of the class of service you wish to modify. The system prompts for confirma-
tion. If the system informs you “Information not found,” the COS number entered does not exist.
2. Enter Y. The present programming for this COS appears.
3. -Using either the RETURN key or the ARROW keys, move the cursor to the field to be changed.
4. Press the Fl key to clear the field.
INFOSTARIVX2
3.5