Programming instructions

Mailboxes
DESTINATION
The maximum number of destinations per group list. Both the number of group lists and the number
of destinations per list refer to personal group lists established and used by individual subscribers.
OK TO SEND MESSAGE TO SYSTEM GROUP LIST
This option is used to permit a subscriber to use the System Group Lists as a destination. This option
requires a Y (yes) or N (no).
NOTlFlCATlON OF AUTOMATIC MESSAGE ERASE
This option is used to determine if a notification is sent to a subscribers mailbox by the system when
a message has been, or is about to be, automatically erased. This option requires a Y (yes) or N (no).
A Y (yes) permits notifications to be sent.
AUTOMATIC ALERT OF MESSAGE ERASE IN ADVANCE
Saved messages are stored for the number of days specified in the Keep Saved Messages field. The
Automatic Alert Of Message Erase In Advance field is used in conjunction with the Notification Of
Automatic Message Erase option. The value entered specifies the number of days before the sched-
uled erase date that an “erased message” notification is sent to the subscriber.
NOTIFICATION OF NON RECEIPT OF MESSAGE AFTER
One of the delivery options available to mailbox holders is “notification of non-delivery.” The value
entered for Notification Of Non Receipt Of Message After specifies the number of days the system
waits for the destination mailbox to listen to the message before placing a notification of non-delivery
in the sending subscriber’s mailbox.
END OF RECORDING ALERT IN ADVANCE
When recording a message, the system alerts the mailbox holder when the end of the allowed record-
ing time is near. This alert is a short beep. The alert tone is also played to an outside caller leaving a
message in the subscriber’s mailbox. The value programmed for the End of Recording Beep is how
long before the end of the recording time the system alerts the subscriber. This value is entered in
seconds.
TYPE OF OUT DIALING
This parameter is not used at this time, and should not be programmed.
SEND MSG TAG
Defines which message delivery options are permitted for messages sent to mailboxes with this class of
service. There are two fields to enter. The field labeled IN refers to messages sent by subscribers. En-
ter a 1 to allow the confidential option. Enter a 2 to allow the priority option. Enter a 3 to allow
proof of delivery. Enter a 4 to allow “specify delivery time.” The field labeled OUT refers to mes-
sages sent by non-subscribers. Enter a 1 to allow the confidential option. Enter a 2 to allow the prior-
ity option. Options 3 and 4 have no function for messages sent by non-subscribers.
MWI RESET OPTION
This option effects when a message waiting indication is sent to the telephone system for mailboxes
with this class of service. If this field contains a 1, the first message received in the mailbox will cause
the MWI turn on code to be sent to the telephone system. The MWI turn off code will not be sent to
the telephone system until all new messages have been acted upon (saved or erased).
3.4
INFOSTARlW2
System Administrator’s Manual
revised 7191