Programming instructions
Initial Setup
be the same code used on the Line Set-up screen and the PBX Parameters screen (System code and
PBX code are the same thing).
.
1. Enter the 3-character system (PBX) code. For example,
IDS
for the EXECUTONE IDS. The cursor
moves to Function.
2. Enter
OCL.
The system prompts for confirmation. Press Y. The present PBX Functions programming
is displayed.
3. Press the down arrow key until the cursor reaches Use Port.
4. Enter the port number(s) which are to be used for outdial. Press the
RETURN
key after each entry. If
no ports are entered, the system
uses
all
ports
for outdial.
5. Press the
F5
key. The system prompts for confiiation. Press Y if all information is correct. Press N to
cancel the request to save the information.
2.11 LINE SET-UP SCREEN
The Line Set-up screen is used to
link
a
port
with
a Company
(usually EXC) and a
PBX
based on
the 3-character code in the Run field. The Run field at the top of the screen corresponds to the Run
field on the Run Dialogue screen. When a call is answered on a port, the Line Set-up screen pro-
grammed with the same 3-character
Run
code as on the Run Dialogue screen for that port is used to
process the call. This Line Set-up screen tells the system which PBX Parameter and PBX Function
screens to use, and which 3-character Company code to use (e.g., which Company Parameters
screen, which mailbox numbers, etc.). The Line Set-up screens are pre-programmed for a number of
PBXs and the information on the screens should not normally be changed.
The fields on the Line Set-up screen used for Release
2.0
are
RUN, PORT, LINK TO COMPANY,
LINK TO PBX,
and
RINGS BEFOR ANSWER.
The remaining fields are deliberately left blank. Do
NOT program anything in these fields.
[LINE SET-UP SCREEN]
RUN................[EXC] PORT...................[Ol]
LINK TO COMPANY....[EXC] LINK TO PBX...........[IDS]
PULSE OPTION.......[-]
MAP [#I > 1-1
[*I>[-1
INCREMENT TIME OUT.[-]
Am L-1
RINGS BEFOR ANSWER.[l]
VOICE FILE NAME....[
RUN TIME PATH......[
i
REPORTS............[-]
ACCEPT DID.........[
USE Tl.............[-j
] ACCEPT DNIS.......[-]
TRANSFER ALLOWED...[-] HOST TYPE......[
-1
AUTO ACTIV [-I Sun [ :
l-I-:-l Man [-:-l-[-:-l
Tue [
-:-l-L:-1 Wed [-:-l-[-:-l
Thu [
-:-1-[-:-1 Fri f-:-1-1-:-1
Sat [-:-l-[-:-l
E [FB]Clear [FS]Save [Fs]Del [F'I]Scroll [FB]Find [FB]Prev [FlO]Next [Esc]Quit
2.14
Figure 2-10 Line Set-up Screen Release 2.0
INFOSTARIVX2
System Administrator’s Manual
revised 7191