Programming instructions

Initial Setup

NOTE: In software versions prior to release 2.0, if a change is made to a PBX Parameter

screen, and the change is saved, the corresponding PBX Function screen must also be

saved (even if no changes were made to this screen).

DELETE PBX PARAMETER SCREEN

From the Main Menu, press the F4 key, then press 2. The programming screen appears. See Figure

2-8. The cursor should be in the System Code. If this is not the record to be deleted, press F3, and

then Y

clear the screen.

NOTE: The

and

FlO

keys can be used to scroll back and forth through the records

instead of entering the company, mailbox, etc. to find a record.

1. Enter the desired system code. The system should display the message, “Information found, display

it? ”

2. Press the Y key.

3. Press the F6 key, and then press Y to confirm.

2.10 PBX FUNCTIONS SCREEN

The PBX Functions screen is used to integrate the message waiting indication (MWI) and outdial fea-

tures. There are several screens are already defined for certain telephone systems. These systems are

listed in Section 2.3 Auto Integration. If you are connecting the VX2 system to a telephone system

not listed, the values for this screen must be determined from the telephone system vendor (or tele-

phone system documentation).

2.12

[PBX FUNCTION SCREEN]

DTMF SET ON .......

SET OFF ......

DATA SET ON.......

SET OFF.....,

FLAGS........

t-1 t-1 i-1 t-1 t-1 t-1

USE PORT . . . .

I-1 L-1 L-1 I-1

: [Ft]Clear [Fb]Save

[FG]Del [F'I]Scroll [FI]Find [FB]Prev [FlO]Next

[Esc]Quit =

Figure 2-9 PBX Functions Screen

INFOSTARIKY2