Programming instructions

Initial Setup
2.7 COMPANY INFORMATION
The first thing to program is the name and address of the installation. This information is programmed
on the Company screen.
From the Main Menu, press the Fl key, then press 1. The Company screen appears. See Figure 2-4.
The ESCAPE key can be used at any time while in this screen to return to the Main Menu.
COMPANY.... COMPANY....
MAILBOX DIR - MAILBOX DIR -
[COMPANY s.cREEN] [COMPANY SCREEN]!,
STARTS: STARTS: _ /- /
- I- I- -
NAME: NAME:
ADDRESS: ADDRESS:
P.O.BOX: P.O.BOX:
CITY: CITY:
STATE: STATE: ZIP: ZIP:
- - --- ---
TELEPHONE: TELEPHONE:
FAX: FAX:
REMARKS: REMARKS:
= [FS]Clear [FB]Save [FB]D~~ [F'I]Scroll [FI]Find [FQ]P~~V [FlO]Next [Esc]Quit = = [FS]Clear [FB]Save [FB]Del [F'I]Scroll [FI]Find [FQ]Prev [FlO]Next [Esc]Quit
Figure 2-4 Company Screen
At the top of the screen in the left corner is a place to enter the company code. This is a 3-digit
code used to define which company this screen is being programmed for. Presently, the system can be
‘programmed for one company. The default company code is EXC.
1. Enter EXC. The cursor moves to MaiZbox Dir. This is the directory on the hard disk where the system
mailboxes reside.
NOTE: This information is already programmed into the system. DO NOT change or de-
lete this information unless directed to by an authorized INFOSTAR/VXZ, service center.
2. Press the FlO key. An entry similar to “C: \MAILBOX\EXC” appears.
3. Press the RETURN key until the cursor reaches Name.
4. Enter the name, address, and telephone number of the installation using the RETURN key after each
entry and to move the cursor.
A field at the bottom called Remarks can be used to add any necessary information.
5. When all information for this menu has been entered, press the F5 key to save the information.
6. Press the ESCAPE key to return to the Main Menu.
After the company information has been entered, the system must be configured. The information
necessary to configure the system to a particular installation is entered using the Utilities menu.
INFOSTARIW2
System Administrator’s Manual
revised 7191
2.5