Programming instructions

Initial Setup
2.2.2 CONFIRMATION REQUIRED
For some functions you may be asked to confirm the action you requested before it is actually ex-
ecuted by the system: This confirmation process is a safeguard for actions that would cause some in-
convenience if performed accidentally. When a confirmation is required, a prompt appears on the
screen requesting you enter “Y” or “RETURN”to confirm the operation. Pressing “N” cancels the
request.
2.2.3 DEFAULT VALUES
Most screens contain pre-defined (system generated) data in one or more of their data entry areas.
For example, when you review the parameters for a particular class of service, you will note that all
entries on the screen have been filled in. These default values are entered so the system can begin to
operate without entering data in all fields. You should change these values as needed.
2.3 AUTO INTEGRATION
When the system is powered up for the first time, or after the system has been upgraded from a soft-
ware release without the auto integration, a PBX Selection menu appears (see Figure 2-2). This menu
is used to automatically configure the system for integration with a particular PBX.
NOTE: This menu is designed to configure the system to certain PBXs. If the PBX your
system is connected to is not on the menu, or if you are interfacing (and not integrating)
the system to the PBX, select EXC. Then configure the system using the Integration Note
appropriate for the PBX.
Select Your PBX
Figure 2-2 PBX Selection Menu
The PBX Selection menu contains integrations for 4 telephone systems. The codes EXC, IDS, 228,
and l-08 all correspond to the EXECUTONE@ Integrated Digital System. These 4 codes appear to
maintain backward compatibility with previous software releases.
2.2
INFOSTARIVX2
System Administrator’s Manual
rovi~oa 7191