Programming instructions

Introduction
1.5.7 HARD DISK DRIVE
This is the storage device for the system. It provides storage for:
,
8 operating system
0 system software
0 voice prompts
0 user voice messages
The storage capacity of the hard disk is either 40, 80, or 200 MB, depending upon storage time de-
sired.
1.58 HARDWARE ACTIVATOR
The system also requires a hardware activator be installed. This hardware activator is commonly called
a “dongle,” or a “key” and is installed on the parallel printer port. This activator does not interfere
with the operation of the printer.
da Eda
Figure l-l Hardware Activator
‘i .6 SYSTEM SOFTWARE
System software is located on the system hard disk. The disk based software includes the operating
system, the voice mail code, system prompts, and greetings.
The operating system software controls the system hardware resources. The voice mail software con-
trols the user interface and determines the options available to the subscribers.
1.7 AVAILABLE CONFIGURATIONS
The INFOSTAWVX2 is available with 2, 4, or 8 ports, and can be equipped with a hard disk to pro-
vide 3, 6, or 15 hours of storage. A 40 MB disk can store approximately 3 hours of voice messages.
An 80 MB disk can store approximately 6 hours of voice messages. A 200 MB disk can store approx-
imately 15 hours of voice messages. Each model can be easily upgraded from one size to the next.
INFOSTARIKYZ
1.5