Programming instructions

System Administration Reports
10.13.3 PRINTING THE HOURLY PORT STATISTICS REPORT
1. While in the Hourly Port Statistics report, you will notice that the cursor highlights the [Page] bracket.
Press the LEFT ARROW key to re-highlight the [Opr] bracket. Press the P key.
I
File Spec[\RPT\REPORT.DSP ] Oprd]P:Print C:Com F:File Page[-]
I
2. The system will display “Working., *Press Esc to abort.”
3. The system will prompt “Set the printer...Ready to Print? (y/n)”
4. Press Y (Yes), the printer will begin printing the report. If you press N (No), the system will prompt
“Ok” and you will have to re-enter the Hourly Port Statistics report by pressing the S key in the [Opr]
bracket once again.
10.13.4 COPYING THE HOURLY PORT STATISTICS REPORT TO A DISK
1.
2.
3.
4.
While in the Hourly Port Statistics report, you will notice that the cursor highlights the [Page] bracket.
Press the LEFT ARROW key to re-highlight the [Opr] bracket. Press the F key.
f
File Spec[\RPT\REPORT.DSP
] Oprd]P:Print C:Com F:File PageE-
Enter a file name of your choice. File names can consist of up 8 characters (letters or numbers), a
period, and 3 additional characters called an extension. Select a file name that is meaningful to you
and indicates the contents of the file. For example, HSYSPORT.292 or HOUR.SYS If you wish to
copy the report to a floppy disk in the A drive (the floppy disk drive) precede the file name with A
followed by a colon (:). For example, A:HSYSPORT.292 copies a report called HSYSPORT.292 to a
floppy disk in the A drive.
After you have entered the file name, press the Enter key. When the report has been copied to the
disk, the following is displayed, “ 1 file(s) copied/moved.”
Press the Esc key again to return to the On Line Programming Menu.
10.24
INFOSTARlVX2
System Administrator’s Manual
revised 2192 - software version 3