Programming instructions
System Administration Reports
-
0
0
0
0
0
0
0
-
SYSTEM PORT STATISTICS
================================================================================
FROM 12/05/9i TO 12/05/91
================================================================================
#SUBS 0 #TIMES ALL BUSY 0
#NON-SUBS 19 %BUSY 0.00
#OUTGOING 0 AVG. ALL BUSY 0o:oo
#TOTAL CONN
19 TIME ALL BUSY 0
#INBOUND MIN. 258 AVG. CONN MIN. 13:35
#OUTBOUND MIN. 0
#TOTAL MIN. 258
#XFRS 0
-
0
0
0
0
0
0
0
-
#XFRS
#TIMES ALL BUSY
%BUSY
Figure lo-10 System Port Statistics Summary Report
The number of transfers made by the VX2.
Defines how many times the ports are all busy during the day.
The percentage of time that all ports were busy.
AVG. ALL BUSY Defines the average time in minutes of how long all the ports were busy.
TIME ALL BUSY Defines the total time in minutes of how long all ports were busy.
AVG. CONN MIN. Defines the length in minutes of an average call.
10.12.3 PRINTING THE SYSTEM PORT STATISTICS REPORT
1.
While in the
System Port Statistics
report, you will notice that the cursor highlights the [Page] bracket,
Press the
LEFT ARROW
key to re-highlight the [Opr] bracket. Press the
P
key.
2. The system will display “Working.. .Press
Esc
to abort.”
3. The system will prompt “Set the printer...Ready to Print..? (y/n)”
4. Press Y (Yes), the printer will begin printing the report. If you press N (No), the system will prompt
“Ok” and you will have to re-enter the
System Port Statistics
report by pressing the S key in the [Opr]
bracket once again.
10.12.4 COPYING THE SYSTEM PORT STATISTICS REPORT TO A DISK
1.
While in the
System Port Statistics
report, you will notice that the cursor highlights the [Page] bracket.
Press the
LEFT ARROW
key to re-highlight the [Opr] bracket. Press the
F
key.
2. Enter a file name of your choice. File names can consist of up 8 characters (letters or numbers), a
period, and 3 additional characters called an extension. Select a file name that is meaningful to you
and indicates the contents of the file. For example, SYSPORT.292 or PORT.SYS. If you wish to copy
the report to a floppy disk in the A drive (the floppy disk drive) precede the file name with A followed
by a colon (:). For example, A:SYSPORT.292 copies a report called SYSPORT.292 to a floppy disk in
the A drive.
3. After you have entered the file name, press the
Enter
key. When the report has been copied to the
d&k, the following is displayed, “ 1 file(s) copied/moved.”
4. Press the
Esc
key again to return to the
On Line Programming Menu.
10.22
INFOSTARIKX2
System Administrator’s Manual
revised 2192 - software version 3