Programming instructions

System Administration Reports
10.11.3 PRINTING THE PORT STATISTICS BY PORT REPORT
1. While in the Port Statistics report, you will notice that the cursor highlights the [Page] bracket. Press
the LEFT ARROW key to re-highlight the [Opr] bracket. Press the P key.
2. The system will display “Working.. .Press Esc to abort.”
3. The system will prompt “Set the printer.. .Ready to Print..? (y/n)”
4. Press Y (Yes), the printer will begin printing the report. If you press N (No), the system will prompt
“Ok” and you will have to re-enter the Port Statistics report by pressing the S key in the [Opr] bracket
once again.
File Spec[\RPT\REPORT.DSP
] Opra]P:Print C:Com F:File PageE-
10.11.4 COPYING THE PORT STATISTICS BY PORT REPORT TO A DISK
1. While in the Port Statistics report, you will notice that the cursor highlights the [Page] bracket. Press
the LEFT ARROW key to re-highlight the [Opr] bracket. Press the F key.
File Spec[\RPT\REPORT.DSP ] Oprd]P:Print C:Com F:File Page[-]
2. Enter a file name of your choice. File names can consist of up 8 characters (letters or numbers), a
period, and 3 additional characters called an extension. Select a file name that is meaningful to you
and indicates the contents of the file. For example, PORT.292 or PORT. If you wish to copy the report
to a floppy disk in the A drive (the floppy disk drive) precede the file name with A followed by a colon
(:). For example, A:PORT copies a report called PORT to a floppy disk in the A drive.
3. After you have entered the file name, press the Enter key. When the report has been copied to the
disk, the following is displayed, “ 1 file(s) copied/moved.”
4. Press the Esc key again to return to the On Line Programming Menu.
10.20
INFOSTARIVX2
System Administrator’s Manual
revised 2192 - software version 3