Programming instructions

System Administration Reports
10.9 SYSTEM GROUP LIST REPORT (0 REPORT)
The System Group List report provides a listing of the members of each of the system group lists es-
tablished.
10.9.1 ACCESSING THE SYSTEM GROUP LIST REPORT
1. From the On Line Programming Menu, press the 0 key.
2. The screen will prompt “Processing please wait...Report completed.” Press any key.
3. The cursor will highlight the [Opr] bracket. Press the S key for screen, P for print, or F for file.
4. If you pressed S, the System Group List report appears. To print the report, see printing instructions on
the following page. To copy the report to a file, see the instructions on the following page.
5. The cursor will highlight the [Page] bracket. Use the Page Up or Page Down keys to scroll through the
report, or type the numerical page you wish to review and press Enter.
6. To exit the report, press the Esc key. The On Line Programming Menu appears.
10.9.2 REPORT DEFINITIONS
GROUP#
The group number and any name programmed for the group list.
MEMBERS Lists the mailbox numbers of the members of the group list.
-
0
0
0
0
0
0
0
-
SYSTEM CROUP LIST REPORT
GROUP #: EXC00030
MEMBERS: 0003001
0003002
0003003
0003004
0003005
0003006
0003007
0003008 0003009 0003010 0003011 0003012 0003013 0003014
0003015 0003016 0003017 0003018 0003019 0003020 0003021
0003022 0003023 0003024
GROUP #: EXC00050 EVERYONE ON THE SYSTEM
MEMBERS: 0003001
0003002
0003003
0003004
0003005
0003006
0003007
0003008 0003009 0003010 0003011 0003012 0002013 0003014
0003015
0003016
0003017
0003018
0003019
0003020
0003021
0003022 0003023 0003024
0003025 0003026 0003027 0003028
0003029 0003030 0003031 0003032 0003033 0003034 0003035
Figure 10-6 System Group List Report
-
0
0
0
0
0
0
0
-
INFOSTARIVX2
System Administrator’s Manual
revised 2192 - software version 3
10.15