Programming instructions

System Administration Reports
10.7.3 PRINTING THE MAILBOX SUMMARY REPORT
1. While in the Majlbox Summary report, you will notice that the cursor highlights the [Page] bracket.
Press the LEFT ARROW key to re-highlight the [Opr] bracket. Press the P key.
File S~~~[\RPT\REPORT.DSP
] Opra]P:Print C:Com F:File Page[-]
2. The system will display “Working...Press Esc to abort.”
3. The system will prompt “Set the printer...Ready to Print..? (y/n)”
4. Press Y (Yes), the printer will begin printing the report. If you press N (No), the system will prompt
“Ok” and you will have to re-enter the Mailbox Summary by pressing the S key in the [Opr] bracket
once again.
10.7.4 COPYING THE MAILBOX SUMMARY REPORT TO A DISK
1. While in the Mailbox Summary report, you will notice that the cursor highlights the [Page] bracket
Press the LEFT ARROW key to re-highlight the [Opr] bracket. Press the F key.
f
File Spec[\RPT\REPORT.DSP
] Oprd]P:Print C:Com F:File Page[-]
2. Enter a file name of your choice. File names can consist of up 8 characters (letters or numbers), a
period, and 3 additional characters called an extension. Select a file name that is meaningful to you
and indicates the contents of the file. For example, BOXSUM. or BOX.SUM. If you wish to copy
the report to a floppy disk in the A drive (the floppy disk drive) precede the file name with A followed
by a colon (:). For example, A:BOX.SUM copies a report called BOX.SUM to a floppy disk in the A
drive.
3. After you have entered the file name, press the Enter key. When the report has been copied to the
disk, the following is displayed, “ 1 file(s) copied/moved.”
4. Press the Esc key again to return to the On Line Programming Menu.
10.12 INFOSTARfVX2
System Administrator’s Manual
revised 2192 - software version 3