Programming instructions

Outdial
ERASE AN OUTDIAL BIN
To erase an outdial bin:
1. From the main menu, press q for personal options.
2. Press
El
for message notification, then press
ia
for bin number maintenance.
3. Press q to erase a bin number.
4. Dial the desired bin number (l-9).
MODIFY AN OUTDIAL BIN
B-I”I-I’+J -+f~Dkil&i;
Bin
Modify (l-9)
Maint .
To modify the contents of an outdial bin:
1. From the main menu, press q for personal options.
2. Press
El
for message notification, then press
El
for bin number maintenance.
3. Press m to modify a bin number.
4. Dial the desired bin number (l-9). The system plays the current contents of the bin. If the contents
are correct, dial El.
If the contents are not correct, dial
El.
The system will prompt for new informa-
tion.
9.5.2 OUTDIAL ADMINISTRATION
The outdial administration selection is used to program the schedules used by outdial when attempting
to reach a subscriber. Each subscriber can program an outdial schedule for weekdays and a schedule
for weekends. Both the weekday and weekend schedule can be divided into 2 schedules (schedule 1
and schedule 2). This allows you to program gaps in the day. The schedules are allowed to overlap.
In addition, there is an override schedule (schedule 3) for weekdays and one for weekends. When
the override schedule is programmed, it takes the place of schedules 1 and 2.
Each schedule is programmed with:
l a start and stop time
l the outdial bin number containing the telephone number where a subscriber can be reached
l the number of times to attempt to reach a subscriber
l an alternate bin number (optional)
l the type of message (all or priority) which causes an outdial
l how long after a message has been received to place the outdial
l message senders who cause an outdial (subscribers in a particular group list, a specific mailbox
number, or any new message.)
9.14 INFOSTARIVX2
System Administrator’s Manual
revised 7191