Programming instructions

Outdial
4. Enter the desired delay between tries in seconds for this class of service, then press the RETURN key.
The cursor moves to Max Retries for No Answer.
5. Enter the desirei maximum number of retries for this class of service, then press the RETURN key.
The cursor moves to Delay Between Tries for No Answer.
-6. Enter the desired delay between tries in seconds for this class of service, then press the RETURN key.
7. When aU desired fields are complete, press the F5 key to save the screen. The system prompts for
confirmation. Press Y to save the information, or N to return to the screen and change something.
8. To start a new record, press the F3 key, and answer Y.
MODIFYING OUTDIAL PARAMETERS OF A CLASS OF SERVICE
From the Main Menu press the Fl key, press 8, press 7, then press 1. The programming screen ap-
pears. See Figure 9-6. The cursor should be in the Class of Service field. If this is not the record to
be modified, press F3, and then Y to clear the screen.
NOTE: The F9 and FIO keys can be used to scroll back and forth through the records.
1. Enter the desired class of service. The system should display the message, “Information found, display
it? ”
2. Press the Y key.
3. Use the RETURN key to move the cursor to the field to be modified, and enter your changes. The Fl
key is used to clear the field.
4. When all desired fields are changed, press the F5 key to save the screen. The system prompts for
confirmation. Press Y to save the information, or N to return to the screen and change something.
5. To clear the screen, press the F3 key, and answer Y.
9.12
INFOSTARIVXZ
System Administrator’s Manual
revised 7191