Programming instructions
Outdial
PCMA
,
Sched From Until
Bin1
Attempt
Bin2
Override Status
Outdial Canceled
Priority Message Call After - how long after a priority message has
been received to place the outdial call. Enter a single digit 1-9 to indi-
cate hours. Enter two digits lo-99 to indicate minutes. Enter 00 to
call immediately.
The start and stop time during which to attempt an outdial. Enter the
time in 24-hour clock format (e.g, 2 pm is 14:OO). This is entered for
each of the 2 schedules and the override schedule.
Wakeup
is not
used at this time.
The outdial bin number containing the telephone number where a sub-
scriber can be reached.
The number of times to attempt to reach a subscriber. Enter a number
from 1 to 9. Enter at least 1.
An alternate bin number containing the telephone number where a
subscriber can be reached. Leave blank for no alternate.
This field is used both to indicate and to change the status of the
override schedule. A 1 in this field indicates the override schedule is
on for this
SCHEDULE NUM.
A 0 in this field indicates the override
schedule is off.
This field is used both to indicate and to change the status of the out-
dial feature. If an outdial call is answered and whoever answers the
call dials a * in response to the outdial greeting (indicating the called
party is not at that number), the system automatically turns off out-
dial. A message is then left in the subscriber’s mailbox indicating that
outdial has been turned off. This message remains in the subscriber’s
mailbox until outdial is turned back on. Outdial remains off until the
subscriber turns it back on. See Section 9.5.3
- Turn Outdial OnlOff.
A Y in this field indicates outdial has been canceled.
ADDING A SCHEDULE
From the
Main Menu
press the
Fl
key, press 8, press 7, then press
1.
The screen appears. See Fig-
ure 9-6. If there is an existing record, it is displayed. Press F3, and then Y to clear the screen. If
there are no existing records, the screen is blank.
1. Enter
EXC
for the Company. The cursor moves to Mailbox.
2. Enter the mailbox number to be programmed, and press the
RETURN
key. The cursor moves to
Schedule Num.
3. Enter either 1 (weekdays) or 2 (weekend). The system should display the message, “Information not
found, press
RETURN
to continue.”
4.
Press the
RETURN
key. The cursor moves to
Notification
Flag.
5. Enter either 1 (on) or 0 (off). The cursor moves to N. T (notification type).
6. Enter either 1 (all messages) or 2 (only priority messages). The cursor moves to Grp/Box.
7. If the system is to outdial only when a message is received from members of a select group list or from
an individual mailbox, enter the group list number or mailbox number. If the system is to outdial
regardless of who sent the message, leave this field blank. Then press the
RETURN
key. The cursor
moves to NMCA.
9.8
INFOSTARIVXZ
System
Administrator’s
Manual
revised 7191