Programming instructions

Outdial
[MAILBOX BIN NUMBER SCREEN]
This Is an example of a possible dialing sequence needed
, for a display pager. The sequence varies depending upon
the type of pager.
Pager dial-up number.
Pauses to wait for the'pager company to
p-,vary. answer. The number of pauses needed can
Pager ID number followed by
BIN NUMBER [02]
/
TEL NUMBER [18005552121
,.,,.I,,,
44335#2036552200#
1
TEL TYPE..-.[3]
\,
\
TEL TYPES: [l] External Number.
Number to display on the pager,
usually the number to the /VX2.
[2] Internal Ext. Number.
[3] Beeper.
= [FS]Clear [F5]Save [F6]Del [F7]Scroll [FS]Find [Fg]Prev [FlO]Next [Esc]Quit
Figure 9-4 Mailbox Bin Number Screen Programmed For A Pager
MODIFY OR DELETE A BIN NUMBER
From the Main Menu press the Fl key, press 8, press 7, then press 2. The programming screen ap-
pears. See Figure 9-3. The cursor should be in the Company field. If this is not the record to be mo-
dified, press F3, and then Y to clear the screen.
NOTE: The F9 and FlO keys can be used to scroll back and forth through the records
instead of entering the company, mailbox, etc. to find a record.
1. Enter EXC for the company. The cursor moves to Mailbox.
2. Enter the mailbox number to be modified, and press the RETURN key. The cursor moves to Bin
Number.
3. Enter the bin number to be modified. The system should display the message, “Information found,
display it?”
4. Press the Y key.
5. To delete the record, press the F6 key, and then press Y to confirm.
To modify the record, use the RETURN key to move the cursor to the field to be modified, and enter
your changes. Use the Fl key to clear the field. When all desired fields are changed, press the FS key.
The system prompts for confirmation. Press Y to save the information, or N to return to the screen and
change something.
6. To clear the screen, press the F3 key, and answer Y.
9.6 INFOSTARlVX2
System Administrator’s Manual
revised 7191