Programming instructions

Outdial
2. Enter OCL. The system prompts for confirmation. Press Y. The present PBX Functions programming
is displayed.
,
3.
Press the down arrow key until the cursor reaches Use Port.
4.
Enter the port number(s) which are to be used for outdial. Press the RETURN key after each entry. If
no ports are entered, the system uses all ports for outdial.
5. Press the FS key to save the screen. The system prompts for confirmation. Press Y if all information is
correct. Press N to cancel the request to save the information.
NOTE: In software versions prior to release 2.0, if a change is made to a PBX Function
screen, and the change is saved, the corresponding PBX Parameter screen must also be
saved (even if no changes were made to this screen).
9.4.2 MAILBOX SET-UP SCREEN
The Mailbox Set-up screen must be programmed for each mailbox that is to use the outdial feature.
Access the screen from the Main Menu (with the system off line) by pressing Fl and then 2. For
each mailbox to use outdial, program the OUT DIAL ALLOWED field to Y (yes). See Figure 9-2.
CAUTION: Do NOT use the CONTROL and C key combination to move around the
Mailbox Set-up screen.
[MAILBOX SCREEN]
CMP L-1
BOX[
-1 I
SET BY [-I
gzg-
.NEW USER TUTORIAL.[-] GUEST
7 [II
CCR INPUT........[-]
GUEST
: t-i GUEST _
DEPARTMENT........[
-1
ATTEND EXT
SPELL NAME........[
i
q [FB]Clear [Fb]Save [FB]Del [F7]Scroll [FB]Find [F9]Prev [FlO]Next [Esc]Quit :
Figure 9-2 Mailbox Set-up Screen
9.4.3 MAILBOX BIN NUMBER SCREEN
ADDING A BIN NUMBER
The Mailbox Bin Number screen is used to program the user’s telephone numbers. There are 5 fields
to be programmed on the screen. From the Main Menu press the Fl key, press 8, press 7, then
press 2. The Mailbox Bin Number screen appears. See Figure 9-3. If there is an existing record, it is
displayed. Press F3, and then Y to clear the screen. If there are no existing records, the screen is
blank.
9.4
INFOSTARIVX2
System Administrator’s Manual
revised 7191