User guide

Call Coverage 29
One of the following messages will display after the call is
answered.
Non-network system or in same Node:
Network system with call passed across a switch:
XXXXXXXXX = Name of calling party
YYYYYY = Specific CO Line type being used (e.g., PRI #23)
HH:MM:SS = Amount of time on the call
SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot
perform the call coverage function. The SLT extension need
not be physically installed, only the SLT card must be
installed.
CALL FOR STA XXXX
FROM STA YYYY HH:MM:SS
XXXXXXXXX CALLING
YYYYYY HH:MM:SS