User guide

2 911 Alert
The initial 911 Alert indications include:
Audible ringing tone
Green flashing 911 ALERT flexible button LED
Automatic LCD display of 911 call information
XX = Index number (01-16)
Station users and attendants can press the flexible button as
necessary to view additional 911 call information in the stored
list. Once a station user or attendant views the information for
all 911 calls in the system list:
The LEDs at all stations will change to a solid red indication.
The audible ringing tone at all stations ceases.
The LCDs at all stations will revert to a normal display.
The list remains available for review by pressing the 911 ALERT
flexible button as necessary, until after the messages are
deleted.
To delete logged 911 Alert messages:
An attendant must use the following steps to delete the
messages on a system-wide basis.
1. Press the 911 ALERT flexible button to display the 911 call
information for deletion.
2. Press FLASH to delete that message.
E911 CALL XX: STA XXXX
MM/DD/YY HH:MM
Dialing 911 from any station overrides previously
enabled features such as Do Not Disturb.