User guide

2
Step 1
Slide the front cover off the USB Modem and insert your SIM
and Micro SD card (sold separately) as shown.
Step 2
Important. If you have an earlier version of the VMB software
on your computer, you must un-install the VMB software
completely and re-boot your PC before inserting this USB
Modem.
Step 3
Plug the USB Modem fi rmly into your computer’s USB port.
You should see a progress bar whilst the Vodafone Mobile
Broadband service is installed on your computer from the
USB Modem. Once setup is complete, the Vodafone Mobile
Broadband application is started automatically, and you are
connected to the Vodafone network (if a PIN is required you
will see a popup screen requesting it before you can connect).
The LED on the USB Modem will change from fl ashing to solid,
and you will see 2 popup screens.
Set up your
USB Modem
Note: Some computers
may be set up to prevent
automatic installation
of the VMB Lite service
from your USB Modem.
In this case, follow
the steps in the hints
and tips section to
manually install the
VMB Lite service on your
computer.
On a Windows 8 PC
the user experience is
slightly different. This is
explained on the next
page.
Micro
SD card
SIM card