User guide

3
4
Set up your modem
Before you can start using your new
modem, you’ll need to set it up.
I. Insert your SIM into your modem
You will need to have an activated
SmarTone-Vodafone SIM card – this
should have been provided when the
modem was purchased.
Put the SIM card into the side of the
modem.
II. Attach your modem
Plug the smaller end of the adapter into
the modem as shown and plug the other
end into your laptop’s or PC’s USB port.
This should automatically start the
software – see next page.
•
For other versions of Windows
If you have an earlier version of
Windows
®
, then you may need to select
the start-up program using the file
explorer:
This is on the drive called Vodafone
Mobile Connect Lite.
The startup program is called
VMCLiteSetup.exe.
For Mac OS X systems
If you’re using Mac OS X 10.3.5 or higher,
you will need to install the software from
the CD-ROM, or download it from
smartone-vodafone.com/mobilebroadband.
•
•
Run the software
For Microsoft
®
Windows Vista™
(32 bit) or Windows
®
XP systems
If your computer is running Microsoft
Windows XP, it should automatically
start the driver setup process (your
modem already contains the software
needed). This could take a few minutes to
complete. Then it will start the Vodafone
Mobile Connect Lite software.
You’ll now see a license agreement
screen.
Agree to the licence agreement.
You’ll then see a new icon appear
in the bottom right of your screen.
If you need to start
Vodafone Mobile
Connect Lite again,
just double-click on
the icon.
•
•
•