User`s manual

Initial installation

Disconnect any duplex telephone sets connected to other telephone sockets.

Connect an ADSL filter to each one (like the one contained in the package) by

inserting the telephone cable into the PHONE port.

Finally, connect the filters to the respective telephone sockets on the wall. It is

suggested that you should connect up to 2 additional telephone sets on the

same telephone line.

Telephone set Telephone socketTelephone cable ADSL filter

2. Installing the device for combined fixed telephony and

Internet access services

Telephone socketPower socket

Vodafone DSL Router

Wi-Fi button:

Press to activate/

deactivate Wi-Fi

Telephone set

Disconnect your telephone set cable from the telephone socket (if there is a

telephone set connected to the socket). Insert the grey DSL/LINE telephone cable

into the grey DSL port of the Vodafone DSL Router (port

, p. 6). Insert the other

end of the cable into the telephone socket on the wall.

If you have activated the relevant service, connect the 2 telephone sets to the first

and second black PHONE ports of the Vodafone DSL Router (port

, p. 6).

Insert the end of the power adapter into the correct port (port

, p. 6) of the

Vodafone DSL Router and then to a power supply socket.

The service will still be provided even if the power supply to the Vodafone DSL

Router is interrupted. The device is fitted with built-in batteries to ensure its

operation for 60 minutes.

3. Wired connection to a computer

You may connect up to 4 computers via Ethernet/LAN cables so that they can communicate

with one another and share the same ADSL connection. Insert the yellow LAN cable into one

of the 3 Ethernet ports (port

, p. 6) of the Vodafone DSL Router. Insert the other end of the

cable into the Ethernet/LAN port of your computer.

LAN/Ethernet cable

This applies both if you have activated the Internet access service only and if you have

activated the combined fixed telephony and Internet access services.