User`s manual

6
7
Initial installationEquipment
3. Vodafone DSL Router technical characteristics
The ports necessary for installing
the device are located on the back of
the Vodafone DSL Router.
Power supply port
ADSL line telephone cable connection port
LAN/Ethernet network connection port
Telephone set connection port
ON/OFF button
USB port
Restart button
1
2
3
4
5
7
6
1. Installing the device for Internet access service
Connect your equipment to the telephone socket which corresponds to the line on which your
Vodafone services have been activated by following the steps described below (it is suggested
that you should connect it to the main telephone socket):
A
B
C
Telephone
socket
Power
socket
Vodafone DSL Router
Wi-Fi button:
Press to activate/deactivate Wi-Fi
Telephone set
ADSL splitter
D
Disconnect your telephone set cable from the telephone socket (if there is a telephone
set connected to the socket). Insert the telephone set cable into the PHONE port of the
ADSL splitter.
Connect the ADSL splitter to the telephone socket on the wall.
Insert the grey DSL/LINE telephone cable into the DSL port (port
2
, p. 6) of
the Vodafone DSL Router. Insert the other end of the telephone cable into the DSL
(or Modem) port of the ADSL splitter.
Insert the end of the power adapter into the correct port (port
1
, p. 6) of the Vodafone
DSL Router and then to a power supply socket.
A
B
C
D