User guide
3
To prepare the Vodafone Mobile Wi-Fi R210, you need to 1.
insert your SIM (and MicroSD card if you are using one for fi le
storage) before use.
The device is now ready to use - plug it into the mains or your 2.
PC. The battery will be charged in the background. Make sure
the device is fully charged (approximately 3 hours) before
using it in battery mode.
Switch on the device by pressing and holding the power 3.
button for 3 seconds. The device will go through its
start-up sequence, and will automatically connect to the
network unless a PIN code is required. Check the display for
connection status.
Use the normal Wi-Fi application on your computer or device 4.
to connect. Select the Mobile Wi-Fi network (SSID) from the
list of available Wi-Fi networks, click Connect and enter the
WPA2 password (secure Wi-Fi network key). The SSID and
Wi-Fi key are printed on the back of the R210 device, and are
also on the Reminder Card.
Getting
started:
Step 1 of 2
Note: Once setup
is complete, when
connected to the R210
via Wi-Fi (and you have
installed the software
onto your PC) you
can access the R210
configuration screen by
clicking on the Mobile
Wi-Fi desktop icon
.
Alternatively, you can
enter the following
addresses into your
browser:
http://VodafoneMobile.
wifi or http://192.168.0.1
You may want to save
these addresses as
favourites in your
browser so you can
access the Mobile Wi-Fi
web UI application
screen easily.
SIM card
Micro SD
card