User guide

ManualsBrandsVodafone ManualsComputer equipmentR206

To prepare the Vodafone Mobile Wi-Fi R206, you need 1.

to insert your SIM and battery before use. Note the Wi-Fi

network name (SSID) and secure Wi-Fi network key that can

be found on a label inside the back cover of the device as

shown below.

Plug the device into the mains or your PC. The battery will 2.

be charged in the background. Make sure the device is fully

charged (approximately 3 hours on mains) before using it in

battery mode. Please only use the supplied charger with this

device.

Switch on the device by pressing and holding the power 3.

button for 3 seconds. The device will go through its

start-up sequence, and will automatically connect to the

network unless a PIN code is required. Check the display for

connection status.

Getting

started:

Step 1 of 2

Note: Once setup

is complete, when

connected to the R206

via USB (and you have

installed the software

onto your PC) you

can access the R206

configuration screen by

clicking on the Mobile

Wi-Fi desktop icon

Alternatively, if you

are connected over

Wi-Fi, you can enter the

following addresses into

your browser:

http://VodafoneMobile.

wifi or http://192.168.0.1

You may want to save

these addresses as

favourites in your

browser so you can

access the Mobile Wi-Fi

web UI application

screen easily.

SIM

card

Wi-Fi

Network

Name and

Key

Battery