User guide

146
Items Setting Range/Default
Basic Settings
IP/Port Filtering
- Options: Enable, Disable
- Default: Disable

Default Policy
- Options: Accepted, Forbidden
- Default: Accepted
IP/Port
Filtering
Settings
Source IP Address
- Options: Number of four sets of 0 to
255
- Default: (none)

Dest. IP Address
- Options: Number of four sets of 0 to
255
- Default: (none)

Protocol
- Options: TCP+UDP, TCP, UDP, ICMP
- Default: TCP+UDP

Source Port Range
- Options: 1 - 65535 Join by "-" if
specifying range
- Default: 1 - 65535

Dest. Port Range
- Options: 1 - 65535 Join by "-" if
specifying range
- Default: 1 - 65535

Comment
- Default: (none)
・Firewall > Port Mapping
Items Setting Range/Default
Port Mapping
Basic Settings
- Options: Enable, Disable
- Default: Disable

Src. Port
- Options: 1 to 65000
- Default: (none)

Dest. IP Address
- Options: Number of four sets of 0 to
255
- Default: (none)

Dest. Port
- Options: 1 to 65000
- Default: (none)

Protocol
- Options: TCP+UDP, TCP, UDP
- Default: TCP+UDP

Comment
- Default: (none)
・Firewall > UPｎP
Items Setting Range/Default
UPnP Settings
UPnP Settings
- Options: Enable, Disable
- Default: Disable
・Router Settings
Items Setting Range/Default
LAN Interface
Setup
IP Address
- Options: Number of four sets of 0 to
255
- Default: 192.168.128.1

Subnet Mask
- Options: Number of four sets of 0 to
255
- Default: 255.255.255.0

DHCP Server
- Options: Enable, Disable
- Default: Enable

DHCP IP Pool (start IP address)
- Options: Number of four sets of 0 to
255
- Default: 192.168.128.20

DHCP IP Pool (end IP address)
- Options: Number of four sets of 0 to
255
- Default: 192.168.128.253

DHCP Lease Time (hour)
- Options: 1 to 24
- Default: 24
・Ethernet