System information

Advanced Configuration Guide

Vodafone Mobile Broadband Hotspot

Vodafone MiFi 2352 October 2009

Version 1.3

The Vodafone Mobile Broadband Hotspot comes pre-configured with the information

required to connect to the Vodafone mobile network. It will not normally require any

additional configuration to the basic settings unless you are using the device behind a

corporate firewall, and this may require the appropriate proxy server settings to be

modified (see following sections for how to do this).

WARNING ! It is highly recommended that you set up security for your Vodafone Mobile

Broadband Hotspot at this time. The device has WEP security enabled, but you may want to

change the WEP network key and your device logon password with personalised settings.

Note: if you are connected to the device over WLAN and find the hotspot redirects to the WEB UI

(i.e. configuration page) instead of the page you expected when using browser, this will be due to

the fact that the device cannot connect the user to a mobile broadband network.

If you have trouble connecting to the device ensure your WEP security key has been entered

correctly. Note: The WEP key is case sensitive - please ensure you input it with the correct upper

and lower case characters. An additional common cause of PC connection problems could be that

your computers WLAN adapter has become confused by working with multiple WLAN devices. The

normal way to fix this on a PC is to right click on the Wireless Network Connection icon in the

Windows toolbar, then select on

Repair.

Please check the LED state and also the connected state in the web UI to confirm the device is

showing “Connected”, and if not refer to the Troubleshooting section later in this guide.