User manual
10
Step 3
Connect equipment that requires network access to the Ethernet port
of your router. You can connect one device directly, or several devices
using a network switch.
If you’re using PoE as the power source, you need to connect any
devices via an available Ethernet port on your PoE power source (be it
a PoE network switch or PoE power injector).
Switch on your power supply and wait 2 minutes for your Vodafone
MachineLink 3G to start up and connect to the mobile network.
Your router has an active SIM card preinstalled and arrives with
preconguredsettingsthatshouldsuitmostcustomers.
Your router is now connected.
To check the status of your router, compare the LED indicators on the
device with those listed on page 11 of this guide.