User manual

3 DC power via eld terminated power source

If an 8-35V DC power supply is available, you can insert the wires

into the supplied terminal block to power your router. Use a no3

atheadscrewdrivertotightentheterminalblockscrewsand

secure the power wires, making sure the polarity of the wires are

correctly matched, as illustrated below.

Tip: You can connect

both the PoE and DC

power sources at the

same time. When

both are connected,

the DC power acts as

backup to the PoE

input.

–

The green power LED on the router lights up when a power source

is connected.