Nokia C6–00 User Guide Issue 1
Contents Contents Safety About your device Office applications Network services Shared memory Magnets and magnetic fields 5 5 6 6 6 7 Find help Support In-device help Do more with your device Update device software Settings Access codes Remote lock Prolong battery life Increase available memory 8 8 8 8 8 9 9 10 10 11 Get started Keys and parts (front) Keys and parts (top) Keys and parts (sides) Keys and parts (bottom) Keys and parts (back) Insert the SIM card and battery Memory card Antenna location
Contents Add a mailbox Read e-mail Send an e-mail 46 47 47 Mail for Exchange 48 Messaging Messaging main view Write and send messages Messaging inbox View messages on a SIM card Cell broadcast messages Service commands Messaging settings 49 49 49 50 51 51 51 51 Nokia Messaging About Nokia Messaging 53 53 Connectivity Data connections and access points Network settings Wireless LAN Access points View your active data connections Synchronisation Bluetooth connectivity Transfer data using a USB cable P
Contents Music Play a song or podcast Playlists Podcasts Transfer music from a computer Ovi Music Nokia Podcasting FM radio 88 88 89 89 89 90 90 93 Videos Download and play a video clip Video feeds My videos Transfer video clips from your PC Videos & TV settings 94 94 95 95 96 96 Personalise your device Change the look of your device Profiles 3-D tones Modify the home screen Modify the main menu 97 97 97 97 97 98 Applications Calendar Clock RealPlayer Recorder Notes Office 98 98 99 100 101 101 10
Safety Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN RESTRICTED AREAS Follow any restrictions.
Safety internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.
Safety Magnets and magnetic fields Keep your device away from magnets or magnetic fields. © 2010 Nokia. All rights reserved.
Find help Find help Support When you want to learn more about how to use your product or you are unsure how your device should function, see the support pages at www.nokia.com/ support or your local Nokia website, www.nokia.mobi/support (with a mobile device), the Help application in the device, or the user guide. If this does not resolve your issue, do one of the following: • • • Restart the device: switch off the device, and remove the battery.
Find help of your device. Updating the software may also improve the device performance. To get a notification when new software is available for your device, register with My Nokia, and subscribe to notifications for text or e-mail messages. For more information, go to www.nokia.com/ mynokia. Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the installation is completed and the device is restarted.
Find help require service. Additional charges may apply, and all the personal data in your device may be deleted. For more information, contact a Nokia Care point or your device dealer. Personal Unblocking Key (PUK) code and PUK2 code — These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the network service provider whose SIM card is in your device.
Find help • • • new areas on the map, which increases the demand on battery power. You can prevent the automatic download of new maps. If the signal strength of the cellular network varies much in your area, your device must scan for the available network repeatedly. This increases the demand on battery power. If the network mode is set to dual mode in the network settings, the device searches for the 3G network. You can set the device to use only the GSM network.
Get started Get started Keys and parts (sides) Keys and parts (front) 1 2 3 4 5 6 7 8 Proximity sensor Earpiece Touch screen Call key Menu key Light sensor Secondary camera End/Power key Do not cover the area above the touch screen, for example, with protective film or tape.
Get started 1 2 3 13 Camera flash Camera lens Loudspeaker Note: The surface of this device does not contain nickel in the platings. The surface of this device contains stainless steel. Insert the SIM card and battery Follow the instructions carefully, to avoid damaging the back cover. 4 Align the contacts of the battery with the corresponding connectors on the battery compartment, and insert the battery in the direction of the arrow.
Get started this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. 2 Insert the memory card A memory card may be already inserted in the device. If not, do the following: 3 1 2 Open the memory card slot cover. Insert a compatible memory card in the slot. Ensure that the contact area on the card is facing down and towards the slot. 4 5 6 When Removing memory card will close all open applications. Remove anyway? is displayed, select Yes.
Get started Switch the device on or off Switch the device on 1 Press and hold the power key. 2 3 2 If prompted, enter a PIN code (provided by your network service provider, for example, 1234) or lock code, and select OK. The preset lock code is 12345. If you forget the code and your device is locked, your device will require service and additional charges may apply. For more information, contact a Nokia Care point or your device dealer. Switch the device off Press and hold the power key.
Get started Tap and double-tap To open an application or other element on the touch screen, you normally tap it with your finger. However, to open the following items, you must tap them twice. • • List items in an application, such as the Drafts folder in the Messaging application. Files in a file list, for example, an image in the Captured folder in the Photos application. Tip: When you open a list view, the first item is already highlighted. To open the highlighted item, tap it once.
Get started 17 In the text input view, to switch between , the available text input modes, tap and select the desired input mode. The input methods and languages supported by the handwriting recognition vary by region. Keyboard input Keyboard Scroll To scroll up or down in lists that have a scroll bar, drag the slider of the scroll bar. In some list views, you can place your finger on a list item and drag up or down. Tip: To view a brief description of an icon, place your finger on the icon.
1 2 3 4 5 6 7 8 9 Get started Function key. To insert special characters printed at the top of keys, press the function key, and then press the desired key. To enter several special characters in a row, press the function key twice quickly. To return to normal mode, press the function key. Shift key. To switch between upper and lower case modes, press the shift key twice. To enter a single upper case character in lower case mode, or vice versa, press the shift key, and then the desired alphabet key.
Get started 19 Touch input settings Select Menu > Settings and Phone > Touch input. To configure text input settings for the touch screen, select from the following: Handwriting training — Open the handwriting training application. Train the device to recognise your handwriting better. This option is not available in all languages. Writing language — Define which language-specific characters in your handwriting are recognised and how your on-screen keyboard is laid out.
9 Get started Shift - Changes the character case, turns predictive text input modes on or off, and switches between the alphabet and number modes. Lock the keys and touch screen To lock or unlock the touch screen and the keys, slide the lock switch on the side of the device. When the touch screen and keys are locked, the touch screen is switched off and the keys are inactive. Do not connect products that create an output signal as this may cause damage to the device.
Get started automatically activated, and transfer can be done. Transfer content for the first time 1 To retrieve data from the other device for the first time, on your device, select Menu > Applications > Tools > Phone setup > Phone switch. 2 Select the connection type you want to use to transfer the data. Both devices must support the selected connection type. 3 If you select Bluetooth connectivity as the connection type, connect the two devices.
Your device Edit a shortcut Select Options > Shortcut settings. You can create or change the name of the shortcut, for example. View the transfer log Select a shortcut in the main view and Options > View log. If an item to be transferred has been edited in both devices, the device attempts to merge the changes automatically. If this is not possible, there is a transfer conflict.
Your device Add items to the home screen Select and hold an empty area in the home screen, and from the pop-up menu, select Add content and the item. Using widgets may involve the transmission of large amounts of data (network service). Move an item in the home screen Select Options > Edit content and the desired item, and drag and drop it to a new location. Remove an item from the home screen Select and hold the item to remove, and from the pop-up menu, select Remove.
Your device You are using your second phone line (network service). You have set your device to divert incoming calls to another number (network service). If you have two phone lines, a number indicates the active line. Your device is ready for an internet call. You have an ongoing data call (network service). Messaging indicators You have unread messages. If the indicator is blinking, the SIM card memory for messages may be full. You have received new mail.
Your device Shortcuts To switch between open applications, press and hold the menu key. Leaving applications running in the background increases the demand on battery power and reduces the battery life. To open the browser application, in the dialler, tap and hold 0. To change the profile, press the power key, and select a profile. To call your voice mailbox (network service), in the dialler, tap and hold 1. To open a list of last dialled numbers, in the home screen, press the call key.
Your device Volume and loudspeaker control Adjust the volume of a phone call or sound clip Use the volume keys. The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear. Use the loudspeaker during a call Select Loudspeaker. Turn off the loudspeaker Select Activate handset. Warning: Continuous exposure to high volume may damage your hearing.
Your device For availability and subscription to data connection services, contact your service provider. HSDPA only affects the download speed; sending data to the network, such as messages and e-mail, is not affected. Ovi (network service) Visit Ovi Ovi contains services provided by Nokia.
Your device Create a Nokia account 1 Select Ovi Chat, and when prompted, connect to the internet. 2 Enter the required information. 3 In the My profile view, enter your profile information. Your first and last name are mandatory details. 4 Select Done. If you have already registered to Ovi using your PC or mobile device, you can start using Ovi Contacts with the same account details. Sign in to Ovi Contacts and activate the service Select Ovi Chat, and enter your user name and password.
Your device Tell your friends what you are doing at the moment Select What are you doing?, and enter text in the field. Show your friends what music you are currently listening to Select Now playing. To do this, you must allow your now playing information to be shared in the presence settings. Edit your contact information Select a field, and enter text. In the My profile view, select Options and from the following: Edit text — Cut, copy, or paste text.
Your device Send a chat message Enter the text in the message field, and select the send icon. In the chat view, select Options and from the following: Send — Send the message. Add smiley — Insert a smiley. Send my location — Send your location details to your chat partner (if supported by both devices). Profile — View the details of a friend. My profile — Select your presence status or profile image, personalise your message, or change your details. Edit text — Copy or paste text.
Your device landmarks > Options > New landmark. To add your current location as a landmark, select Current position. To browse for a location on a map, select Select from map. To add a landmark manually, select Enter manually. To select the locations you want to share with your friends, select Share my location > My shared landmarks, and select the landmarks from the list. Select Options to edit, mark, and unmark items on the list.
Your device Refresh interval — Select how often you broadcast your current location. Add a location to the landmarks list Select Share my location > My shared landmarks > Options > New landmark. Add your current location as a landmark Select Current position. Browse for a location on a map Select Select from map. Add a landmark manually Select Enter manually. Select locations you want to share with your friends 1 Select Share my location > My shared landmarks. 2 Select the landmarks from the list.
Make calls a contact, select the desired number from the list, and press the call key. Make calls Touch screen during calls Your device has a proximity sensor. To extend battery life and prevent accidental selections, the touch screen is disabled automatically during calls, when you place the device next to your ear. Do not cover the proximity sensor, for example, with protective film or tape.
4 Make calls To send the tone, select OK. You can add DTMF tones to the phone number or DTMF field in contact details. To end an active call and replace it by answering the waiting call, select Options > Replace. Many of the options that you can use during a voice call are network services. Answer or reject a call To answer a call, press the call key or swipe Swipe to answer from left to right. Swipe is in use only when the touch screen is locked.
Make calls In the home screen, select to open the dialler, and select and hold the assigned key number. Voice dialling Your device automatically creates a voice tag for contacts. Listen to a voice tag for a contact 1 Select a contact and Options > Voice tag details. 2 Go to a contact detail, and select Options > Play voice tag.
Make calls Add a new participant to a conference call Make a call to another participant, and add the new call to the conference call. Have a private conversation with a conference call participant Select . Go to the participant, and select . The conference call is put on hold on your device. The other participants continue the conference call. To return to the conference call, select . Drop a participant from a conference call Select , go to the participant, and select .
Make calls 2 Select Options > Call > Video call. The secondary camera on the front is used by default for video calls. Starting a video call may take a while. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible), you are asked if you want to try a normal call or send a message instead. The video call is active when you see two videos, and hear the sound through the loudspeaker.
Make calls Replace the grey screen with an image captured by the camera Select Menu > Settings and Calling > Call > Image in video call. Reject a video call Press the end key. Video sharing Use video sharing (network service) to send live video or a video clip from your mobile device to another compatible mobile device during a voice call. The loudspeaker is active when you activate video sharing.
Make calls If you do not know the SIP address for the contact, you can use the phone number of the recipient, including the country code, to share video (if supported by the network service provider). Set up your 3G connection Contact your service provider to establish an agreement for you to use the 3G network. Ensure that the 3G access point connection settings for your device are configured properly. For more information about the settings, contact your service provider.
Make calls Reject the received invitation Select No. The sender receives a message that you rejected the invitation. You can also press the end key to reject the invitation and end the voice call. End the sharing session Select Stop or end the voice call. When you end the call, video sharing also ends. Internet calls About internet calls With the internet call network service, you can make and receive calls over the internet.
Make calls Edit the service destination Select Service connectivity. Log The log stores information about the communication history of the device. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area. Recent calls You can view information about your recent calls. Select Menu > Applications > Tools > Log and Recent calls.
Contacts (phonebook) your mailbox, multimedia messaging centre, or web pages are shown as packet data connections. View the packet data connection details Go to an incoming or outgoing packet data connection event indicated with GPRS, and select Options > View. Contacts (phonebook) To open Contacts, select Menu > Contacts. Copy a phone number from the log Select Options > Use number > Copy. You can, for example, paste the phone number to a text message.
Contacts (phonebook) Manage names and numbers Select Menu > Contacts. Delete contacts Select a contact and Options > Delete. To delete several contacts at the same time, select Options > Mark/Unmark to mark the desired contacts, and to delete, select Options > Delete. Copy contacts Select the contact, Options > Copy, and the desired location. Add contacts to favourites Tap and hold a contact, and select Add to favourites.
Contacts (phonebook) Set contacts as favourites You can set contacts as your favourite contacts. These contacts appear at the top of the contacts list and are marked with a star icon. Select Menu > Contacts. Options > Edit > Add image, and an image from Photos. To remove the ringing tone, select Default tone from the list of ringing tones. Set a contact as a favourite Select a contact and Options > Add to favourites.
Contacts (phonebook) Display contacts stored on the SIM card in the contacts list Select Options > Settings > Contacts to display > SIM memory. The numbers you save in the contacts list may not be automatically saved to your SIM card. Copy contacts to the SIM card Go to a contact, and select Options > Copy > SIM memory. Select the default memory where to save the new contacts Select Options > Settings > Default saving memory > Phone memory or SIM memory.
E-mail Send a message to all group members Tap and hold the group, and select Create message . Set a ringing tone for a group Tap and hold the group, and select Ringing tone. Rename a group Tap and hold the group, and select Rename. Delete a group Tap and hold the group, and select Delete. E-mail About e-mail Select Menu > E-mail. With Mail, you can add several mailboxes and access them directly from your home screen. In the main e-mail view, you can switch from one mailbox to another.
E-mail Select Menu > E-mail Add a mailbox Select New mailb., and follow the instructions. 47 Tip: To go to a web address that is in a mail, select the address. To add the web address to your bookmarks, after the page loads, select Options > Web page options > Save as bookmark. Add an e-mail widget to the home screen In the home screen, select and hold the desired location for the mail widget, and from the pop-up menu, select Add content and the desired mail widget.
Mail for Exchange Mail for Exchange With Mail for Exchange, you can receive your work e-mail to your device. You can read and reply to your e-mails, view and edit compatible attachments, view calendar information, receive and reply to meeting requests, schedule meetings, and view, add, and edit contact information. With Mail for Exchange, the use of the lock code may be mandatory.
Messaging Messaging Messaging main view Select Menu > Messaging. Messaging is a network service. Create a new message Select New message. Tip: To avoid rewriting messages that you send often, use saved messages in the Templates folder in My folders. You can also create and save your own templates. Messaging contains the following folders: Inbox — Received messages, except e-mail and cell broadcast messages. My folders — Organise your messages into folders. Drafts — Draft messages that have not been sent.
Messaging Add an object to a message Select and the relevant type of content. The message type may change to multimedia message based on the inserted content. Send the message , or press the call key. Select Your device supports text messages beyond the limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly.
Messaging receive settings from your service provider in a configuration message. Save the data in a message Select Options and the appropriate option. Web service messages are notifications (for example, news headlines), and may contain a text message or a link. For availability and subscription, contact your service provider. View messages on a SIM card You can view messages that are stored on a SIM card. Select Menu > Messaging and Options > SIM messages.
Messaging messages you have sent (network service). Message validity — Select for how long the message centre resends your message if the first attempt fails (network service). If the message cannot be sent within this time period, the message is deleted from the message centre. Message sent as — To find out if your message centre is able to convert text messages into these other formats, contact your service provider. Preferred connection — Select the connection to use.
Nokia Messaging Automatically open the browser and retrieve content when you receive a service message Select Download messages > Automatically. Cell broadcast settings Select Menu > Messaging and Options > Settings > Operator message. For available topics and related topic numbers, contact your service provider. Select from the following: Reception — Set your device to receive cell broadcast messages. Language — Select the languages in which you want to receive messages: All, Selected, or Other.
Connectivity Connectivity Your device offers several options to connect to the internet or to another compatible device or PC. For more information on other connectivity methods, see the extended user guide on the product support pages of the Nokia website. Data connections and access points Your device supports packet data connections (network service), such as GPRS in the GSM network.
Connectivity Wireless LAN Your device can detect and connect to wireless local area networks (WLAN). Using a WLAN, you can connect your device to the internet and compatible devices that have WLAN support. About WLAN To use a wireless LAN (WLAN) connection, it must be available in the location, and your device must be connected to the WLAN. Some WLANs are protected, and you need an access key from the service provider to connect to them. Note: In France, you are only allowed to use WLAN indoors.
Connectivity WLAN internet access points Select Menu > Settings and Connectivity > WLAN. Filter out WLANs from the list of found networks Select Options > Filter WLAN networks. The selected networks are not displayed the next time the WLAN wizard searches for WLANs. Display when a WLAN is available Select Show WLAN availability > Yes. Set how often the device searches for available WLAN Select Show WLAN availability > Yes and Scan for networks. View the details of a network Select Options > Details.
Connectivity To view access points stored in your device, select an access point group.
Connectivity send your password encrypted when possible, select Normal. Homepage — Depending on the access point you are setting up, enter the web address or the address of the multimedia message centre. Use access point — Set the device to connect to the destination using this access point after confirmation or automatically. Modify advanced packet data access point settings Select Options > Advanced settings.
Connectivity packet data connections WLAN connections Close a connection Select Options > Disconnect. Close all open connections Select Options > Disconnect all. View the details of a connection Select Options > Details. Synchronisation With the Synchronisation application, you can synchronise your notes, messages, browser bookmarks, and contacts with compatible applications on a compatible PC or on the internet. Select Menu > Settings and Connectivity > Data transfer > Sync.
Connectivity Check with the manufacturers of other devices to determine their compatibility with this device. When the device is locked, only connections to authorised devices are possible. Features using Bluetooth technology increase the demand on battery power and reduce the battery life. Bluetooth settings Select Menu > Settings and Connectivity > Bluetooth. Select from the following: Bluetooth — Activate Bluetooth connectivity.
Connectivity 61 Tip: When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, in the home screen, enter *#2820#. you trust. indicates authorised devices in the paired devices view. Pair devices You can pair your device with a compatible device to make subsequent Bluetooth connections between the devices quicker.
Connectivity If you reject a pairing request from another device, you are asked if you want to block all future connection requests from this device. If you accept the query, the device is added to the list of blocked devices. Remote SIM mode With remote SIM mode, you can use a compatible car kit accessory. Before remote SIM mode can be activated, the two devices must be paired and the pairing initiated from the other device.
Connectivity To use Ovi Suite with USB connection mode, select PC Suite. For more information about Ovi Suite, see the support area at www.ovi.com. Administrative settings Packet data settings Select Menu > Settings and Connectivity > Admin. settings > Packet data. The packet data settings affect all access points using a packet data connection. Open a packet data connection whenever the network is available Select Packet data connection > When available.
Internet Internet With the Web browser, you can view hypertext markup language (HTML) web pages on the internet as originally designed. You can also browse web pages that are designed specifically for mobile devices, and use extensible hypertext markup language (XHTML), or the wireless markup language (WML). To browse the web, you need to have an internet access point configured in your device. Using the web browser requires network support.
Internet Go to URL or search — Enter a web address, or to search the web, enter search words in the search field. Show zoom — Zoom in or out on the web page. To use the expanded toolbar, select Expand toolbar and from the following: Go to feeds — View your current feed subscriptions. Send URL — Send the web address of the current page to another device. Switch win. — Switch between open browser windows. Subsc. feeds — View a list of available web feeds on the current web page, and subscribe to a web feed.
Internet Search for text within the current web page Select Options > Find keyword. To go to the previous or next match, from the toolbar, select Find next or Find previous. Bookmarks You can store your favourite web pages in Bookmarks for instant access. Select Menu > Web. Access bookmarks 1 If you have a page other than Bookmarks as your homepage, select Options > Go to > Bookmarks. 2 Select a web address from the list or from the collection of bookmarks in the Recently visited pages folder.
Internet You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device. For more information, contact your service provider. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security.
Positioning (GPS) addresses of the visited web pages into the Recently visited pages folder, but hide the folder from the bookmarks view, select Hide folder. Form data saving — Select whether you want the password data or data you enter on different forms on a web page to be saved and used the next time you open the page. Cookies — Enable or disable the receiving and sending of cookies. Web feed settings Acc. point for auto-update — Select the desired access point for updating.
Positioning (GPS) 69 About assisted GPS (A-GPS) Your device supports A-GPS (network service). When you activate A-GPS, your device receives useful satellite information from an assistance data server over the cellular network. With the help of assisted data, your device can obtain the GPS position faster.
Positioning (GPS) possible to continue calculating your location with three satellites. However, the accuracy is generally better when more satellites are found. To view the positions of found satellites, select Chg. view. If no satellite signal can be found, consider the following: • • • • If you are indoors, go outdoors to receive a better signal. If you are outdoors, move to a more open space. If the weather conditions are bad, the signal strength may be affected.
Positioning (GPS) Create a new landmark category On the categories tab, select Options > Edit categories. GPS data GPS data is designed to provide route guidance information to a selected destination, position information about your current location, and traveling information, such as the approximate distance to the destination and approximate duration of travel. Select Menu > Applications > Location and GPS data.
Maps Select Menu > Applications > Location and Positioning. Define positioning methods Use only the integrated GPS receiver of your device Select Integrated GPS. Use Assisted GPS (A-GPS) to receive assistance data from a positioning server Select Assisted GPS. Use information from the cellular network (network service) Select Network based. Define positioning server Define an access point and positioning server for network-assisted positioning Select Positioning server.
Maps may be inaccurate and incomplete to some extent and is subject to availability. Never rely solely on the aforementioned content and related services. Navigation view View your location and the map See your current location on the map, and browse maps of different cities and countries. Select Menu > Maps and My position. When the GPS connection is active, marks your current or last known location on the map. If the icon's colours are faint, no GPS signal is available.
Maps Plan a route Plan your journey, and create your route and view it on the map before setting off. 2 Select Menu > Maps. Create a route 1 In the map view, tap a location. To search for an address or place, select Search. 2 Tap the location's information area ( ). 3 Select Add to route. 4 To add another route point, select Add new route point and the appropriate option. Change the order of the route points 1 Select a route point. 2 Select Move.
Maps View traffic events on the map During drive navigation, select Options > Traffic info. The events are displayed as triangles and lines. Update traffic information Select Options > Traffic info > Update traffic info. When planning a route, you can set the device to avoid traffic events, such as traffic jams or roadworks. Avoid traffic events In the main view, select and Navigation > Reroute due to traffic.
2 3 Maps Select Navigation > Home Location > Redefine. Select the appropriate option. Tip: To walk without a set destination, select Map. Your location is displayed on the centre of the map as you move. Share location Publish your current location to Facebook, together with text and a photo. Your Facebook friends can see your location on a map. Select Menu > Maps and Share location. To share your location, you need a Nokia account and a Facebook account. 1 2 3 4 5 6 7 Select Share location.
Camera View your saved places and routes Select Favourites > Places or Routes. Send places to your friends When you want to share place information with your friends, send these details directly to their devices. Send a place to your friend's compatible device Select a location on the map, tap the location's information area ( ), and select Send. Change the look of the map View the map in different modes, to easily identify where you are. Select Menu > Maps and My position.
Camera Select a colour effect. Adjust the white balance. Select the current lighting conditions. This allows the camera to reproduce colours more accurately. Adjust the exposure compensation (images only). If you are shooting a dark subject against a very light background, such as snow, adjust the exposure to +1 or +2 to compensate for the background brightness. For light subjects against a dark background, use -1 or -2. Adjust light sensitivity (images only).
Camera On-screen controls and indicators for still image capture The still image viewfinder displays the following: 1 2 Capture mode indicator Zoom slider. To activate or deactivate the zoom slider, tap the screen. 3 Capture icon. Select to capture an image. 4 Flash mode. Select to change settings. 5 Capture settings. Select to change settings.
Camera Files with location information are indicated with in the Photos application. Avoid touching the flash LEDs when the back cover has been removed. The LEDs may get hot after prolonged usage. After capturing an image After you capture an image, select from the following options (available only if you have selected Options > Settings > Show captured image > Yes): Keep a safe distance when using the flash. Do not use the flash on people or animals at close range.
Camera 81 Sequence mode is available only in the main camera. To use sequence mode, you need to have enough memory available. Tip: To keep your hand steady when capturing an image, try using a delay of 2 seconds. Set the camera to capture images in a sequence > Sequence. To close the 1 Select . settings view, select 2 Press and hold the capture key. The device captures images until you select Stop, or until 18 images have been captured.
Camera 5 Recording settings. Select to change settings. 6 Battery charge level indicator 7 Video quality indicator. To change this setting, select Options > Settings > Video quality. 8 Video clip file type 9 Available recording time. When you are recording, the current video length indicator also shows the elapsed and remaining time.
Photos information attached, the location information is visible to others that view the image or the video clip. You can deactivate geotagging in the camera settings. Audio recording — Record sound. Show last captured video — View the first frame of the recorded video clip after the recording stops. To view the entire video clip, select Play . Default video name — Enter the default name for recorded video clips. Memory in use — Select where to store your video clips.
Photos Images and video clips can also be sent to you from a compatible device. To be able to view a received image or video clip in Photos, you must first save it. View and edit file details Select Menu > Photos. To view and edit the properties of an image or a video clip, select the file, Options > Details, and from the following: The images and video clip files are ordered by date and time. The number of files is displayed. Browse the files Swipe up or down. Open a file Select the file.
Photos Create an album to store items Select Albums > Options > New album. Add an image or a video clip to an album Select the item and Options > Add to album. Delete an image or video clip Select the item and Delete from the active toolbar. View items in the Tags view Select Tags and a tag. You must first add tags to the items. Photos toolbar From the active toolbar, select the desired option.
Photos Remove an image from a tag Select the tag and the image, and Options > Remove from tag. Slide show Select Menu > Photos. To view your images as a slide show, select an image and Options > Slide show > Play. The slide show starts from the selected file. To view only a selection of images as a slide show, select Options > Mark/ Unmark > Mark to mark the images. To start the slide show, select Options > Slide show > Play. To resume a paused slide show, select Continue.
Photos 4 effect. When you have finished editing the image, select Done. To save the changes and return to the previous view, select Back. Edit videos The video editor supports .3gp and .mp4 video file formats, and .aac, .amr, .mp3, and .wav audio file formats. It does not necessarily support all features of a file format or all the variations of file formats.
Music subscribe to such a service on the web page of your service provider. Contact your service provider for more information. Using this service may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges. The recommended connection method is WLAN. Music Warning: Continuous exposure to high volume may damage your hearing.
Music Modify the balance and stereo image, or enhance the bass Select Options > Settings. Return to the home screen, and leave the player playing in the background Press the end key. Close Music player Select Options > Exit. Playlists With playlists, you can create selections of songs to play in a specific order. Select Menu > Music > Music library and Playlists. Create a playlist 1 Select Options > New playlist. 2 Enter a name for the playlist, and select OK. 3 To add songs now, select Yes.
Music Manage and organise your music files with Nokia Music Download the PC software from www.music.nokia.com/download, and follow the instructions. Synchronise music with Windows Media Player Connect a compatible USB data cable, and select Media transfer as the connection mode. A compatible memory card must be inserted in the device.
Music Setting the application to retrieve podcasts automatically may involve the transmission of large amounts of data (network service). Play and manage podcasts Select Menu > Applications > Podcasting and Podcasts. Find podcasts You can find podcasts by searching by keyword or title. View the available episodes of a podcast Select the title of a podcast. A list of episodes is displayed. Select Menu > Applications > Podcasting. Play a fully downloaded episode Select Options > Play.
Music Send a podcast to another compatible device 1 Select Options > Send. 2 Select the sending method (as .opml files in a multimedia message or by Bluetooth connectivity). Open a directory Select Directories, and the desired directory. If the directory is not up-todate, selecting it will start the updating process. When the update is complete, select the directory again to open it. Download podcasts After you have subscribed to a podcast, you can download, play, and manage the podcast episodes.
Music Podcasting settings Select Menu > Applications > Podcasting. Restore default settings Select Options > Restore default. To start using Podcasting, define your connection and download settings. FM radio Listen to the radio Select Menu > Music > Radio. Connection settings Select Options > Settings > Connection and from the following: Default access point — Select the access point to use to connect to the internet.
Videos To listen to saved stations, select Options > Stations, and select a station from the list. To remove or rename a station, select Options > Stations > Options > Delete or Rename. To set the desired frequency manually, select Options > Tune stations > Options > Manual tuning. Videos You can download and stream video clips over the air from compatible internet video services (network service) using a packet data or WLAN connection.
Videos Download a video clip Select Options > Download. Some video clips can be streamed over the air, but others must be first downloaded to your device. Downloads continue in the background if you exit the application. The downloaded video clips are saved in My videos. Stream a video clip or play a downloaded video clip Select the Play icon. To view the control keys during playback, tap the screen. To adjust the volume, use the volume keys.
Videos Video clip details — View information about a video clip. Memory status — View the amount of available and used memory. Sort by — Sort video clips. Select the desired category. Move and copy — Move or copy video clips. Select Copy or Move and the desired location. Transfer video clips from your PC Transfer your own video clips from compatible devices using a compatible USB data cable. Only video clips which are in a format supported by your device are displayed.
Personalise your device Personalise your device You can personalise your device by changing the standby mode, main menu, tones, themes, or font size. Most of the personalisation options, such as changing the font size, can be accessed through the device settings. Change the look of your device Select Menu > Settings and Themes. You can use themes to change the look of the display, such as the background image. To change the theme that is used for all the applications in your device, select General.
Applications To select an image or image slide show as the background image in the home screen, select Menu > Settings and Themes > Wallpaper. To change the clock shown in the home screen, tap the clock in the home screen, and select Options > Settings > Clock type. Modify the main menu In the menu you can access the functions in your device. To open the main menu, press the menu key. To change the menu view, select Options > List view or Grid view.
Applications 99 New to-do note — Add a new to-do note. Manage calendar entries Select Menu > Calendar. Create a calendar entry Select Menu > Calendar. Delete several entries at a time In the month view, select Options > Delete entry > Before selected date or All entries. 1 2 3 Go to the desired date, and select Options > New entry and from the following: Meeting — Set a reminder for your meeting. Meeting request — Create and send a new meeting request. A mailbox needs to have been set up.
Applications 2 3 4 Set the alarm time. Select Repeat to set whether and when the alarm is repeated. Select Done. View your alarms Select Alarms. indicates an active indicates a repeated alarm. alarm. Remove an alarm Select Alarms, go to the alarm, and select Options > Delete alarm. Stop the alarm Select Stop. If your device is switched off when an alarm expires, your device switches itself on and starts sounding the alarm tone. Set the alarm to snooze Select Snooze.
Applications 101 Stream content over the air In RealPlayer, you can only open an RTSP link. However, RealPlayer plays a RAM file if you open an HTTP link to it in a browser. Select Menu > Applications > Tools > RealPlayer. To stream content over the air (network service), select Streaming links and a link. You can also receive a streaming link in a text message or multimedia message, or open a link on a web page.
Applications You can write notes and save received plain text files (.txt file format) to the Notes application. Search for a file Select Options > Find. Enter search text that matches the file name. Write a note 1 Select Menu > Applications > Notes. 2 Select Options > New note. 3 Enter text in the note field. 4 Select Done. Move and copy files and folders Select Options > Organise and the desired option. Manage notes Select Menu > Applications > Notes.
Applications 103 Back up data from the device memory to a memory card Select Options > Back up phone memory. Restore data from the memory card to the device memory Select Options > Restore from mem. card. You can also connect your device to a compatible computer, and use Nokia Ovi Suite to back up data. Dictionary You can translate words from one language to another. Not all languages may be supported. Look up a word to translate 1 Select Menu > Applications > Office > Dictionary.
Applications Convert measures You can convert measures, such as length, from one unit to another. Select Menu > Applications > Office > Converter. 1 2 3 4 In the Type field, select the measure to use. In the first Unit field, select the unit from which you want to convert. In the second Unit field, select the unit to which you want to convert. In the first Amount field, enter the value you want to convert. The second Amount field shows the converted value automatically.
Applications 105 Create and edit notes Select Menu > Applications > Active notes. Create a note Start writing. Edit a note Select Options > Editing options. Select Options and from the following: Insert object — Insert items to the note. Send — Send the note to a compatible device. Link note to call — Select Add contacts to link a note to a contact. The note is displayed when making a call to or receiving a call from the contact.
Settings Settings Some settings may be preset for the device by your service provider, and you may not be able to change them. Phone settings Date and time settings Select Menu > Settings and Phone > Date and time. Select from the following: Time — Enter the current time. Time zone — Select your location. Date — Enter the current date. Date format — Select the date format. Date separator — Select the symbol that separates days, months, and years. Time format — Select the time format.
Settings 107 Language settings Select Menu > Settings and Phone > Language. Change the device language Select Phone language. Change the writing language Select Writing language. Activate predictive text input Select Predictive text. Display settings Select Menu > Settings and Phone > Display. Select from the following: Light sensor — Adjust the light sensor sensitivity of your device. The light sensor turns the lights on when the lighting of your location is dim and off when it is bright.
Settings Some accessory connectors indicate which type of accessory is connected to the device. Select an accessory and from the following: Default profile — Set the profile you want activated each time you connect a certain compatible accessory to your device. Automatic answer — Set the device to answer an incoming call automatically after 5 seconds. If the ringing type is set to Beep once or Silent, automatic answer is disabled. Lights — Set the lights to remain on after the time-out.
Settings 109 access codes similar to the emergency numbers to prevent accidental dialling of the emergency number. If you forget the PIN or PIN2 code, contact your service provider. If you forget the lock code, contact a Nokia Care point or your service provider. Phone autolock period — To avoid unauthorised use, set a time-out after which the device automatically locks. A locked device cannot be used until the correct lock code is entered. To deactivate this option, select None.
Settings Select Menu > Settings and Phone > Phone mgmt. > Factory settings. To restore the settings, you need to enter the lock code. After resetting, the device may take a longer time to switch on. Documents and files are unaffected. Protected content Digital rights management (DRM) protected content, for example some media files, such as images, music, or video clips, comes with an associated licence that defines your rights to use the content.
Settings 111 define to notify of missed events, such as missed calls or unread messages. SIS or SISX application Java application widgets Application manager About Application manager Select Menu > Settings and Application mgr.. With Application manager, you can see the software packages installed in your device. You can view details of installed applications, remove applications, and define installation settings.
Settings 1 To locate an installation file, select Menu > Settings and Application mgr.. Alternatively, search installation files using File manager, or select Messaging > Inbox, and open a message that contains an installation file. In Application manager, select Options > Install. In other applications, select the installation file to start the installation. During installation, the device shows information about the progress of the installation.
Settings 113 Online certificate check — Check online certificates before installing an application. Default web address — Set the default web address used to check online certificates. Calling settings Call settings With call settings, you can define call specific settings in your device. Select Menu > Settings and Calling > Call. Select from the following: Send my caller ID — Select Yes to show your phone number to the person you are calling.
Settings Select Menu > Settings and Calling > Call divert. Call barring affects all calls, including data calls. Divert all voice calls to your voice mailbox or another phone number 1 Select Voice calls > All voice calls. 2 To activate call divert, select Activate. 3 To divert calls to your voice mailbox, select To voice mailbox. 4 To divert calls to another phone number, select To other number, and enter the number, or select Find to retrieve a number saved in the contacts list.
Troubleshooting 115 Troubleshooting To view frequently asked questions about your device, see the product support pages at www.nokia.com/support. Q: What is my password for the lock, PIN, or PUK codes? A: The default lock code is 12345. If you forget the lock code, contact your device dealer. If you forget a PIN or PUK code, or if you have not received such a code, contact your network service provider.
Troubleshooting Q: Why can't I see a wireless LAN (WLAN) access point even though I know I'm within its range? A: The WLAN access point may use a hidden service set identifier (SSID). You can only access networks that use a hidden SSID if you know the correct SSID, and have created a WLAN internet access point for the network on your Nokia device.
Green tips 117 Settings and Connectivity > Admin. settings > Packet data > Packet data connection > When needed. If this does not help, switch the device off and then on again. Green tips Q: Can I use my Nokia device as a fax modem with a compatible PC? Here are tips on how you can contribute to protecting the environment. A: You cannot use your device as a fax modem. However, with call diverting (network service), you can divert incoming fax calls to a fax number.
Product and safety information most applications, select Options > Help). For further support, see www.nokia.com/support. Learn more For more information on the environmental attributes of your device, see www.nokia.com/ecodeclaration. Product and safety information Accessories Warning: Use only batteries, chargers, and accessories approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.
Product and safety information 119 Authenticate hologram 1 When you look at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. • • • • 2 When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively. • • • • • • Successful completion of the steps is not a total assurance of the authenticity of the battery.
Product and safety information the product Eco-Declarations at www.nokia.com/ environment. Additional safety information Small children Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines in the normal use position at the ear or at least 1.5 centimetres (5/8 inch) away from the body.
Product and safety information 121 Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft and may be illegal. Potentially explosive environments Switch off your device in any area with a potentially explosive atmosphere. Obey all posted instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or death.
© 2010 Nokia. All rights reserved. DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-612 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/declaration_of_conformity/. Nokia, Nokia Connecting People, Nokia Original Accessories logo, and Ovi are trademarks or registered trademarks of Nokia Corporation.
service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Index Index — settings — toolbar Symbols/Numbers 3-D ringing tones 97 A A-GPS (assisted GPS) access codes access points accessories accounts Active notes alarm clock albums, media answering calls antennas application settings applications assisted GPS (A-GPS) attachments audio messages 69 9 56, 57 107 31 104, 105 99 85 34 14 108 111, 112 68 50 49 B background image 97 backing up data 102 backing up device memory 102 barring calls 114 battery — charging 15 — inserting 13 — saving power 10 blocking
Index 125 clock 97, 99, 100 computer connections 62 See also data connections conference calls 35 connectivity 58 connectors 12 contacts 42, 43, 44 — adding 42 — copying 44 — defaults 43 — editing 42 — favourites 23 — groups 45 — managing 43 — ringing tones 44 — saving 42 — searching 34 — synchronising 59 — voice tags 43 converter for currency 103 converter for measurements 104 cookies 66 copyright protection 110 currency converter 103 E e-mail — attachments — creating — mailbox — reading and replying to —
Index indicators installing applications internet browser internet calls — settings internet connection See also browser J Java applications K keyboard keypad lock keys and parts L landmarks language settings licences location information lock code lock switch locking — remotely logs loudspeaker M mail Mail for Exchange mailbox — video — voice Maps — browsing — changing views — display elements — driving routes — navigating — planning routes — saving places 23, 50 111 64 40 40 64 111 17 20 12 70 107 1
Index 127 Ovi Contacts — adding friends — availability status — connection settings — landmarks — personalisation — presence — profiles — searching — settings — sharing your location — synchronising Ovi Music Ovi Store 27, 28 29 28 32 31 32 31 28 29 31 28, 31 30 90 27 P packet data connection 41, 57, 63 page overview 65 pairing devices 61 PDF reader 105 personalisation 97 phonebook 44 photographs See camera Photos 83, 84 — albums 85 — organising files 84 — tags 85 — toolbar 85 PIN code 9, 15 PIN2 code 9 p
Index — applications — Bluetooth — browser — calls — camera — certificates — date and time — display — internet calls — language — messages — network — packet data — podcasting — positioning — security — SIP — slide — video — WLAN Share online shared video sharing your location shooting modes — camera SIM card — inserting — messages SIP (session initiation protocol) slide settings slide show SMS (short message service) software applications software updates songs speakerphone Speech speed dialling suppo
Index 129 voice calls See calls voice commands voice dialling voice mailbox volume control 25, 35, 107 35 25 26 W web browser 64 web connection 64 widgets 23 wireless LAN (WLAN) 55 WLAN (wireless local are network) 56 WLAN (wireless local area network) 58 world clock 100 Z Zip manager © 2010 Nokia. All rights reserved.