User guide

2.3 Connecting a computer to your
Vodafone Broadband Complete using a
wireless connection
To setup a wireless connection from your computer
to your Vodafone Broadband Complete, follow these
simple steps:
Enable the WPS function
1. Your Vodafone Broadband Complete will set up
your wireless connection on your computer using
the SSID name located on the rear panel of your
device. By default the WPS function is enabled.
2. Use your computer’s wireless software to fi nd and
connect to your Broadband Complete modem.
It will appear on your computer using the SSID name
located on the rear panel of your device. You will be
prompted to enter the WPA key also located on
the rear panel of your modem.
3. The DSL and Wi-Fi indicators on the front of your
modem will light up, see 1.4 for a description of the
front panel indicators and statuses.
2.5 Using Vodafone Mobile Broadband
with your Vodafone Broadband Complete.
A Vodafone Mobile Broadband Vodem can be used
with your Vodafone Broadband Complete as a backup
internet connection if there is an outage on your
fi xed broadband or while you’re waiting for your fi xed
line broadband connection to get setup.
To check what Vodafone Mobile Broadband Vodems
are compatible with the Broadband Complete
modem see vodafone.co.nz/broadband-wireless-
router/
Inserting the Vodafone Mobile Broadband
Vodem Stick:
1
1. Remove the SIM card holder from the Vodafone
Mobile Broadband Vodem.
2. Insert the SIM card into the card holder.
3. Re-insert the SIM card holder into the Vodafone
Mobile Broadband Vodem.
Make sure your Broadband Complete modem
is plugged in and turned on before trying to
connect using your Mobile Broadband vodem.
Note for pressing the Wi-Fi button:
Press and hold the Wi-Fi button for more than
four seconds to enable the WPS function. Once
the button is pressed and held for more than
four seconds, the Wi-Fi indicator will start to
blink slowly in a few seconds.