User guide

2. Installation guide
This chapter describes how to setup your Vodafone
Broadband Complete.
2.1 Connecting the cables on your
Vodafone Broadband Complete
1. Plug your Vodafone Broadband Complete into the
mains power with the supplied power adapter by
connecting it to the power port on the back of the
device and then plugging it into a wall outlet or a
power strip.
2.Once the device is connected, the power indicator
on the front of your device will light up, indicating
that your Vodafone Broadband Complete has power.
3. Connect the supplied DSL cable to the ADSL port
on your Vodafone Broadband Complete.
4. Then connect the DSL cable to the line fi lter
ADSL port.
5. Plug the other end of the line fi lter into your phone
wall socket.
6. You can also plug in a phone if required to the
phone port of the line fi lter. (Any device plugged into
an active phone jack will require a line fi lter).
Line Filter
DSL Cable
Power
Adapter
2.2 Connecting your computer to your
Vodafone Broadband Complete using the
PC/LAN cable
1. Connect the supplied red PC/LAN cable to
any of the four LAN ports on the rear panel of your
Vodafone Broadband Complete and plug the other
end into the Ethernet port on your computer.
2. The Ethernet indicator on your computer and
the DSL indicator on the front of your Broadband
Complete device will light up, see 1.4 for a
description of the indicators on the Front and Rear
panels of the device.
When you access the internet wirelessly, you do
not need to connect the red PC/LAN cable so
once your computer has connected you will be
able to browse the internet from anywhere within
the range of your device.
Once you have correctly connected the cables to
your Broadband Complete modem will connect
to the Vodafone network and be automatically
confi gured with your new Vodafone settings.
As soon as your modem has been successfully
confi gured, a confi rmation webpage will appear.
It can take between 5 - 10 minutes to complete
this process.