User guide
2.Confi gure the web page as follows:
Step1 Launch the web browser on your computer
and enter http://192.168.1.1 in the address bar.
Step2 Enter the user name and the password in
the displayed window, and then click OK.
Step3 Choose HOME NETWORK > Printer in the
navigation tree to display the Managing your
shared printer page.
Step4 Select Enabled to enable the printer function.
Enter the printer name and the printer model in
the Printer Name and Make and Model text boxes
respectively. For details, see Figure 3-21.
Step5 Click OK to save the settings.
Figure 3-23 Managing your shared printer page.
3.Set the printer parameters on the PC.
Step1 Choose Start > Printers and Faxes. Then
click the Add Printer icon on the left side of the
displayed page.
Step 2 Click Next in the Welcome to the Add
Printer Wizard page.
Figure 3-24 Welcome to the Add Printer Wizard page
Step 3 Select A network printer, or a printer
attached to another computer and then click Next.
Figure 3-25 Add Printer Wizard page.
Step 4 Select Connect to a printer on the Internet
or on a home or offi ce network.
Step5 Enter http://192.168.1.1:631/printers/
myprinter in the URL text box. Then click Next.
The address 192.168.1.1:631 is preset and cannot
be changed, myprinter is the printer name that
is specifi ed on the Managing your shared printer
page.
Step 6 Choose the printer model that you want.
If there is no printer model for you to choose, please
install the printer driver on your PC fi rst.
Step7 Click OK to set the current printer as the
default printer.
Step8 Click Finish to complete the settings.
4. Open the fi les you want to print on your PC. Then
you can choose the printer just installed to print your
fi les.
3.5.3 Accessing the Admin interface
Some advanced settings are only available for
confi guration via the Admin interface.
This is only recommended for people who have
advanced computer knowledge. Any changes
that are made to the default settings are then the
responsibility of the user and we cannot guarantee
that the device will continue to work as tested.
To access the admin interface, do as follows: