Install guide

Customisation Examples
Page 13 of 35
August 2011 

How to disable features?
Certain features can be set in the opco file using xml node element <Features>.
Xml element with default value Description
<ABC>false</ABC>
Should Always Best Connected be enabled in VMB
software? If 'Yes' the software will display the ABC
function in the main view. ABC provides best
connectivity at any time.
<DialUp>false</DialUp> 
Dial-Up allowed? Tell VMB how to deal with the
corresponding Dial-Up service module. If true,
establishing Dial-up connections is allowed.
<DiasbleCA>false</DisableCA>
Should management of conflicting applications be
disabled in VMB software? If not VMB will inform the user
about other application(s) using the same device.
<LAN>true</LAN>
Should LAN be enabled in VMB software? Tell VMB how
to deal with the corresponding LAN service module. And
even if this switch is off, you can use LAN. Eg. the LAN
service module only provides an indication whether a
LAN connection is established or not. "Should LAN be
enabled in VMB software? If set to 'true' this will provide
a VMB software interface to check LAN connectivity.
<MyLocationfalse></Mylocation> Location based service capability called my location.
<NetworkSearchTimeout>360</
NetworkSearchTimeout >
If the user performs a manual network search and the
software is not being able to register onto the previously
selected network a message will ask for automatic
network search. This message will be displayed after the
amount of time defined here.
NetworkSearchTimeout is triggered only by manual
network searches. The dialog shall be presented after 6
minutes (360 seconds) of not being able to register onto
the previously-selected network.
<NetworkSearchTimeoutAuto>360</
NetworkSearchTimeoutAuto>
If the device is searching in automatic mode: to trigger a
Manual search and select to avoid the user having to
remove the SIM.
<PowerOn>true</PowerOn>
Should the device be switched on automatically? If set
to ‘true’, devices which have an initial radio state of OFF
will automatically be switched on.
For those devices which have an initial radio state of OFF
or software disabled status it will be possible for the user