User Guide

Table Of Contents

Online Help

9 System

Huawei

Proprietary and Confidential

For example, www.google.com.

4. Set Maximum hops and Timeout.

5. Click Traceroute.

Wait until the traceroute command is executed. The execution results are displayed in the

Results box.

----End

9.4.3 System Check

If the CPE malfunctions, you can use the System Check tool to preliminarily identify the

problem. To do so:

1. Choose System > Diagnosis.

2. In the Method area, select System check.

3. Click Check.

Wait until the system check is performed. The possible causes of the CPE problem are

displayed on the page.

4. Click Export to export the detailed information to the computer.

If necessary, send the detailed information to maintenance personnel.

----End

9.4.4 Checking the Wireless Status

This page displays information about the wireless network status, such as the PLMN, service

status.

To view the wireless status, perform the following steps:

1. Choose System > Diagnosis.

2. In the Method area, select Wireless status check.

The Wireless Status page is displayed.

----End

9.5 Logs

Logs record user operations and key running events. To view logs:

1. Choose System > Logs.

2. Select the corresponding log level from the Log level drop-down list.

The number of logs in this level is displayed to the right of the drop-down list, and all logs are

displayed in the output box.

3. Select the operation mode.