User Guide

Table Of Contents

Online Help

9 System

Huawei

Proprietary and Confidential

9.1.4 Uploading a Configuration File

You can upload a backed up configuration file to restore the CPE. To do so:

1. Choose System > Maintenance.

2. Click Browse on the Maintenance page.

In the displayed dialog box, select the backed up configuration file.

3. Click Open.

The dialog box closes. In the box to the right of Configuration file, the save path and name

of the backed up configuration file are displayed.

4. Click Upload.

5. Click OK.

The CPE uploads the backed up configuration file. The CPE then automatically restarts.

----End

9.2 Changing the Password

This function enables you to change the login password of the admin user. After the password

changes, enter the new password the next time you log in.

To change the password, perform the following steps:

1. Choose System > Change Password.

2. Enter the current password, set a new password, and confirm the new password.

New password and Confirm password must contain 8 to 15 ASCII characters.

3. Click Submit.

----End

9.3 Setting the Date and Time

You can set the system time manually or synchronize it with the network. If you select Sync

from network, the CPE regularly synchronizes the time with the specified Network Time

Protocol (NTP) server. If you enable daylight saving time (DST), the CPE also adjusts the

system time for DST.

To set the date and time, perform the following steps:

1. Choose System > Date & Time.

2. Select Set manually.

3. Set Local time or click Sync from PC to automatically fill in the current local system time.

4. Click Submit.

----End