User Guide

Table Of Contents

Online Help

5 Wi-Fi

Huawei

Proprietary and Confidential

WPS Mode is set to PBC, the client can connect to the CPE after you press the

WPS button on the CPE and the client.

3. Click Submit.

----End

5.4 Wi-Fi Multi-SSID Settings

The SSID List page shows information about the SSIDs to be configured.

To configure an SSID, perform the following steps:

1. Choose Wi-Fi > Wi-Fi Multi-SSID.

2. Choose an SSID to be configured, and click Edit.

3. Set Status to Enable.

4. Set SSID.

The SSID can contain 1 to 32 ASCII characters. It cannot be empty and the last

character cannot be a blank character. In addition, the SSID cannot contain the

following special characters: / ' = " \ &

5. Set Maximum number of devices.

This parameter indicates the maximum number of Wi-Fi clients that connect to the

CPE.

A maximum of 32 clients can connect to the CPE.

6. Set Hide SSID broadcast to Enable.

If the SSID is hidden, the client cannot detect the CPE's Wi-Fi information.

7. Set AP isolation to Enable.

The clients can connect to the CPE but cannot communicate with each other.

8. Set Security.

If Security is set to WPA-PSK, WPA2-PSK or WPA-PSK & WPA2-PSK, you can set

WPA encryption and WPA-PSK.

WPA-PSK can contain 8 to 63 ASCII characters or 64 hex characters.

If Security is set to WEP, set Authentication mode, Password length and Current

password index, and configure the corresponding keys.

If Password length is set to 128-bit, WPA-PSK can contain 8 to 63 ASCII characters or 64

hex characters.

If Password length is set to 64-bit, the 64-bit encryption key must contain 5 ASCII

characters or 10 hex characters.

9. Click Submit.

----End