User Guide

Table Of Contents

Online Help

3 Internet

Huawei

Proprietary and Confidential

Value Description

Always on

If the conditions permit, the CPE automatically connects to the Internet.

When roaming, accessing the network automatically may incur

additional charges.

Manual

The CPE disconnects from the Internet upon startup. You can connect or

disconnect the CPE to or from the Internet manually.

3. Click Submit.

----End

3.1.3 Selecting an APN Profile

You can select an APN profile for the CPE to access the Internet.

To set the APN profile, perform the following steps:

1. Choose Internet > Network Connection.

2. Select a profile from the Profile drop-down list.

3. Click Submit.

----End

3.1.4 Selecting PDP Type

You can select a PDP (Packet Data Protocol) to set the dial-up type, perform the following

steps:

1. Choose Internet > Network Connection.

2. Set PDP type to one of the following values described in the following table:

Value Description

IPv4

Internet Protocol version 4 (IPv4) that is the foundation for current Internet

technologies. Because IP resources are limited, an IP address is shared by

different persons in different time periods, that is, an IP address is not

allocated to only one network subscriber. Thus, the real-name system

cannot be implemented over the IPv4-based networks.

IPv4/IPv6

IPv4-to-IPv6 transition technology that is used when IPv4 and IPv6 coexist.

3. Click Submit.

----End

3.1.5 Setting Data Roaming

To turn roaming on or off, perform the following steps:

1. Choose Internet > Network Connection.