Nokia 6234 User Guide 9246861 Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-123 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use.
Contents For your safety.................................................................................................................................... 12 General information ........................................................................................................................... 16 Access codes .........................................................................................................................................................................................
3. Call functions.................................................................................................................................. 31 Make a voice call................................................................................................................................................................................. Speed dialing.........................................................................................................................................................
Record sound..................................................................................................................................................................................... List of recordings ............................................................................................................................................................................. Define a storage folder......................................................................................................
Collection............................................................................................................................................................................................... Launch an application .................................................................................................................................................................... Application options .......................................................................................................
Folders .................................................................................................................................................................................................... Flash messages..................................................................................................................................................................................... Write a flash message .........................................................................................
To-do list................................................................................................................................................................................................ Notes....................................................................................................................................................................................................... Calculator .............................................................................................
16.Settings.......................................................................................................................................... 98 Profiles.................................................................................................................................................................................................... 98 Flight mode............................................................................................................................................
Synchronize from a server........................................................................................................................................................... 108 USB data cable ............................................................................................................................................................................... 109 Call................................................................................................................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions.
■ Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply.
• Installation of any complex car enhancements must be made by qualified personnel only. Copyright © 2006 Nokia. All rights reserved.
General information ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see Security p. 111. If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for 5 minutes, and enter the code again.
Barring password The barring password (4 digits) is required when you use the Call barring service. See Security p. 111. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider or network operator.
■ Nokia support and contact information Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product. On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice. For maintenance services, check your nearest Nokia service center at www.nokia.com/repair.
1. Get started ■ Install the SIM card and the battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with the BP-6M-S battery.
3. To release the SIM card holder, gently pull the locking clip of the card holder, and open it (4) Insert the SIM card into the SIM card holder (5). Make sure that the SIM card is properly inserted and that the gold-colored contact area on the card is facing downwards. Close the SIM card holder (6), and press it until it snaps into position. 4. Replace the battery (7) 5. Place the back cover in the correct position (8). Copyright © 2006 Nokia. All rights reserved.
6. Slide the back cover into place (9). ■ Install a memory card The phone’s microSD card included with your phone contains preloaded ringing tones, themes, tones, and graphics. If you delete, reload, or replace this card, these functions and features may not function properly. Use only compatible microSD cards with this device. Other memory cards, such as reduced size MMCs, do not fit in the memory card slot and are not compatible with this device.
To insert the memory card, open the memory card holder as shown (1). Place the memory card in the card holder (2). Make sure that the memory card is properly inserted—that it clicks into the holder—and that the gold-colored contact area on the card is facing upwards. Close the memory card holder. You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in My Items. To format the memory card, see Format memory card p. 80.
1. Connect the charger to a wall outlet. 2. Connect the plug from the charger into the CA-44 charging adapter (not provided with the phone), and the adapter plug into the jack on the bottom of your phone. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. The charging time depends on the charger and the battery used.
■ Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.
2. Your phone ■ Keys and parts • Power key (1) • Earpiece (2) • Left, middle, and right selection keys (3) • End key (4) • 4-way navigation key (5) • Call key (6) • Number keys (7) • Push to talk key (8) • Loudspeaker (9) • Memory card slot (10) • Charger connector (11) • Enhancements connector (12) Copyright © 2006 Nokia. All rights reserved.
• Volume keys (13) • Infrared (IR) port (14) • Camera lens (15) • Camera key (16) ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. • 3G indicator (1) • Signal strength of the cellular network (2) • Battery charge level (3) • Indicators (4) • The name of the network or the operator logo (5) • Clock (6) • Display (7) • The left selection key (8) is Go to or a shortcut to another function. See Left selection key p. 101.
• The middle selection key (9) mode is Menu. • The right selection key (10) may be Names to access the list of contacts in the Contacts menu, an operatorspecific name to access an operatorspecific Web site, or a shortcut to a function that you selected. See Right selection key p. 101. Active standby In the active standby mode, the phone can display separate content item windows, such as shortcuts (1), audio functions (2), the calendar (3), and a user note (4).
My note — To enter a note, select the content window, write your note, and save it. Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is shown. General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default group name and closed user group index. The date is shown if the calendar is not selected as active standby content. Standby mode shortcuts • To access the list of dialed numbers, press the call key once.
The phone registered a missed call. / Your phone is connected to the instant messaging service, and the availability status is online or offline. You received one or several instant messages, and you are connected to the Instant messaging service. The keypad is locked. The phone does not ring for an incoming call or text message. See also Tones p. 98. The alarm clock is set to On. The countdown timer is running. The stopwatch is running in the background.
, , , or A headset, handsfree, loopset, or music stand enhancement is connected to the phone. or A push to talk connection is active or suspended. ■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad; or select Lock. To unlock the keypad select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, select Unlock, press *, and enter the security code.
3. Call functions ■ Make a voice call 1. Enter the phone number, including the area code. For international calls, press * twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3. To end the call, or to cancel the call attempt, press the end key.
Enhanced voice dialing To make a phone call, select and hold Names, and say the name of the contact you wish to call. The phone will automatically associate a virtual voice tag with each contact in the phone memory. Make a voice dialing call If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing in GSM. In WCDMA it is possible to send voice and data simultaneously. Voice commands are language-dependent.
Call waiting During a call, to answer the waiting call, press the call key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, see Call p. 108. ■ Options during a voice call Many of the options that you use during a call are network services. For availability, contact your network operator or service provider. Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker, or Handset.
call can only be made between two parties. The video call can be made to a compatible phone or an ISDN client. Video calls cannot be made while another voice, video, or data call is active. 1. To start a video call, enter the phone number in the standby mode, or select Contacts and a contact. 2. Press and hold the call key, or select Options > Video call. Starting a video call may take a while. Video call and an outgoing animation is shown.
■ Options during a video call Select Options during a video call for the following options: Set contrast, Video motion, Switch to voice, End call, Send DTMF, and Loudspeaker. Copyright © 2006 Nokia. All rights reserved.
4. Write text To enter text (for example, when writing messages), use traditional or predictive text input. To use traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you write text, or appears at the top left of the display, indicating predictive text input, and appears, indicating traditional text input. , , or appears next to the text input indicator, indicating the character case.
1. To start writing a word, use the 2 to 9 keys. Press each key only once for one letter. The phone displays * or the letter if it separately has a meaning as a word. The entered letters are displayed underlined. If you select Word suggestions as prediction type, the phone starts to predict the word you are writing. After you enter a few letters, and if these entered letters are not a word, the phone tries to predict longer words. Only the entered letters are displayed underlined.
5. Navigate the menus The phone offers you an extensive range of functions, that are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List, Grid, Grid with labels or Tab. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2. Scroll through the menu, and select an option (for example, Settings). 3.
6. Media ■ Camera You can take photos or record video clips with the built-in 2 megapixel camera. The camera produces pictures in .jpg format and video clips in .3gp format, and you can digitally zoom up to eight times. Take a photo 1. To open the camera viewfinder, select Menu > Media > Camera. If Video is selected as the default mode, select Options > Still image. To zoom in or out, press the volume key up or down, or the left/right navigation key.
Record a video clip Select Menu > Media > Camera > Options > Video > Record. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in My Items > Video clips. To change the folder for saving the recordings, see Camera settings p. 40. Camera settings Select Menu > Media > Camera > Options > Settings.
Set up the phone for a streaming service You may receive the configuration settings required for streaming as a configuration message from the network operator or service provider. See Configuration settings service p. 17. You can also enter the settings manually. See Configuration p. 110. To activate the settings, do the following: 1. Select Menu > Media > Media player > Streaming settings > Configuration 2. Only the configurations that support streaming are shown.
To rewind the current track, select and hold Release the key at the position you want. 3. To stop the playing, select . To fast forward the current track, select and hold . . Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
■ Radio The FM radio depends on an antenna other than the wireless device’s antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Select Menu > Media > Radio. To use the graphical keys select it.
Visual Radio — to set whether the Visual Radio application is used. Some radio channels may send text or graphical information that you can view using the Visual Radio application. Note: This feature may not be available in your product due to your subscription (network service). Visual Radio settings — to select the options for Visual Radio. To set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual service > Automatically.
2. To start the recording, select . To start the recording during a call, select Options > Record. While recording a call, all parties to the call hear a faint beeping sound about every 5 seconds. When recording a call, hold the phone in the normal position near to your ear. 3. To end the recording, select . The recording is saved in My Items > Recordings. 4. To listen to the latest recording, select Options > Play last recorded. 5.
7. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
■ Connect to a service First, ensure that the correct configuration settings of the service that you want to use are activated. 1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal configuration for browsing. See Set up browsing p. 46. 3.
Browse with phone keys To browse through the page, scroll in any direction. To select a highlighted item, press the call key, or select Select. To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *. Options while browsing Select from the following options: Home — to return to your start page Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts.
■ Bookmarks You can save page addresses as bookmarks in the phone memory. 1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks. 2. Scroll to a bookmark, and select it, or press the call key to make a connection to the page associated with the bookmark. 3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the bookmark to a folder. Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Alerts > Alert for unsecure conn. > Yes — to set the phone to alert when a secure connection changes to an unsecure one during browsing Alerts > Alert for unsecure items > Yes — to set the phone to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see Browser security p. 52. Character encoding > Content encoding — to select the encoding for the browser page content Character encoding > Unicode (UTF-8) web add.
■ Download settings To automatically save all downloaded files in My Items, select Menu > Web > Settings > Downloading settings > Automatic saving > On. ■ Service inbox The phone is able to receive service messages (pushed messages) sent by your service provider (network service). Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service.
■ Cache memory A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache while browsing, select Options > Other options > Clear the cache; in the standby mode, select Menu > Web > Clear the cache.
There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by the service provider. To view the list of the authority or user certificates downloaded into your phone, select Menu > Settings > Security > Authority certificates or User certificates.
8. Applications (Apps.) ■ Games The microSD card of your phone may contain games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open, or press the call key. For options related to a game, see Application options p. 55. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown; see Bookmarks p. 49.
Application options Delete — to delete the application from the phone Details — to give additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) Web page — to provide further information or additional data for the application from an Internet page (network service). It is only shown if an Internet address has been provided with the application.
■ Presenter The Presenter application is compatible with Microsoft Office PowerPoint and enables you to control slide presentations, a software DVD, an MP3 player, or other PC applications remotely from your device. To use applications other than slide presentations and desktop mode, you must create a corresponding custom profile on the PC application. Before you can use the application you must do the following: 1. Install the Nokia Presenter PC application on your PC.
To quit the Presenter, select Options > Exit. Copyright © 2006 Nokia. All rights reserved.
9. Push To Talk (PTT) Note: This feature may not be available in your product due to your subscription (network service). Push To Talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the people you are calling do not have to answer the phone.
■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, you can use the phone normally, by holding it to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls. One-to-one calls are calls you make to only one person.
Make a one-to-one call To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the PTT key. You can also select the contact from Contacts. To start a one-to-one call from the list of PTT channels, select Channel list, and scroll to the desired channel. Select Members, scroll to the desired contact, and press the PTT key. To start a one-to-one call from the list of callback requests you have received, select Callback inbox.
Send a callback request You can send a callback request in the following ways: • To send a callback request from the contacts list in the PTT menu, select Contacts list. Scroll to a contact, and select Options > Send callback. • To send a callback request from Contacts, search for the desired contact, select Details, scroll to the PTT address, and select Options > Send callback.
• To add a contact to the PTT contacts list, select Menu > Push To Talk > Contacts list > Options > Add contact. • To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the desired channel. Select Members, scroll to the member whose contact information you want to save, and select Options. To add a new contact, select Save as. To add a PTT address to a name in Contacts, select Add to contact.
Receive an invitation When you receive an invitation to a group, Channel invitation received: is displayed. 1. To view the contact who sent the invitation and the channel address if the group is not a private channel, select View. 2. To add the channel to your phone, select Save. 3. To set the status for the channel, select Active or Inactive. To reject the invitation, select View > Discard > Yes.
PTT key default function is used to select the default action of the PTT-key. It can be set to opening the Contacts list or Channel list. It can also be set to directly create a PTT call from any state (unless any other contact, group or channel is highlighted) to a contact, channel or group.
10. Messaging You can read, write, send, and save text, multimedia, email, audio, and flash messages. All messages are organized into folders. ■ Text messages (SMS) With the short message service (SMS) you can send and receive text messages (network service). Before you can send any text or SMS email message, you must save your message center number. See Message settings p. 76. To check SMS email service availability and to subscribe to the service, contact your service provider.
3. Scroll down, and write your message in the Message: field. See Write text p. 36. To insert a template into the message, select Options > Use template. 4. To send the message, select Send; or press the call key. See Send a message p. 68. Read and reply to an SMS message 1 message received or the number of new messages with messages received are shown when you have received a message. 1. To view a new message, select Show. To view it later, select Exit.
■ Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. To check availability and to subscribe to the multimedia messaging network service, contact your network operator or service provider. See Multimedia message p. 77. A multimedia message can contain text, sound, pictures, video clips, a business card, and a calendar note.
Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide. To insert a file in the message, select Insert or Options > Insert.
tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later. Cancel message sending When the phone is saving a message in the Outbox folder, Sending message or Sending messages is displayed. To cancel the text message sending, select Cancel. To cancel the sending of the multimedia messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending.
■ Memory full When you are receiving a message, and the memory for the messages is full, Memory full, not possible to receive message(s) is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. To free phone memory, delete photos, ringing tones, or other data in the phone memory.
Write a flash message Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To: field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To send the message, select Send. Receive a flash message A received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read.
Receive an audio message When your phone receives audio messages, the number of messages and the text messages received is shown. To open the message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit. Select Options to see the available options. ■ Email application The email application uses a packet data connection (network service) to allow you to access your email account from your phone when you are not in the office or at home.
The Manage accounts options allow you to add, delete, and change the e-mail settings. Make sure that you have defined the correct preferred access point for your operator. See Configuration p. 110. The e-mail application requires an Internet access point without a proxy. WAP access points normally include a proxy and do not work with the e-mail application.
The e-mail application only downloads e-mail headers at first. 2. Select Back. 3. Select Inboxes, the account name, and the new message, and select Retrieve to download the complete email message. To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select Options > Send and check e-mail Read and reply to email Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. 1.
Spam filter The e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows the user to put specific senders on a black or white list. Black list sender messages are filtered to the Junk folder. Unknown and White list sender messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender.
■ Delete messages To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from which you want to delete messages. Scroll to the desired message, and select Delete. To mark more than one message, select Options > Mark. Mark all the messages you want to delete, and select Options > Delete marked. To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the folder to delete.
Message centres > Add centre — to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider. If you select SIM message centre, you can view the SIM message center information. Message centre in use — to select the message center in use E-mail message centres > Add centre — to set the phone numbers and name of the e-mail center for sending SMS e-mail.
Allow multimedia recept. — to receive or block the multimedia message, select Yes or No. If you select In home network, you cannot receive multimedia messages when you are outside your home network. The default setting of the multimedia message service is generally In home network. Incoming multim. msgs. — to allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception. This setting is not shown if Allow multimedia recept. is set to No.
SMTP password — Enter the password that you want to use for outgoing mail. Display terminal window — Select Yes to perform manual user authentication for intranet connections. Incoming server type — Select POP3 or IMAP4, depending on the type of email system that you are using. If both types are supported, select IMAP4. Incoming mail settings — Select available options for POP3 or IMAP4. Copyright © 2006 Nokia. All rights reserved.
11. My Items In this menu you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. The files stored in My Items use a memory that mainly consists of the microSD card of your phone. You can store images, themes, graphics, ringing tones, video clips, and sound clips in My Items.
12. Organizer ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organizer > Alarm clock. To set the alarm, select Alarm time, enter the alarm time, and select OK. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.
You can also select an option to delete the selected note and delete all the notes that you have marked as done. You can sort the notes by priority or by deadline, send a note to another phone as a text message or a multimedia message, save a note as a calendar note, or access the calendar. While viewing a note, you can also select an option to edit the deadline or priority for the note, or mark the note as done. ■ Notes To write and send notes, select Menu > Organizer > Notes.
Convert currency Select Menu > Organizer > Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign.
To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset. To set the stopwatch timing in the background, press the end key. Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key.
13. Contacts You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image or a video clip for a limited number of contacts. You can also use the video clip saved with a contact as a ringing tone for the contact. The SIM card memory can save names with one phone number attached to them.
2. Search for the contact to which you want to add a new number or text item, and select Details > Options > Add detail. 3. To add a number, select Number and a number type. To add another detail, select a text type, an image or a video clip from My Items, or a new image. To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save.
To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from My Items. ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card.
■ Speed dials To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speeddialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in Call p. 108. To make a call using the speed-dialing keys, see Speed dialing p. 31.
14. Log Note: This feature may not be available in your product due to your subscription (network service). To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients.
15. Instant messages (IM) Note: This feature may not be available in your product due to your subscription (network service). Instant messaging (IM) (network service) is a way to send short, simple text messages to online users, delivered over TCP/IP protocols. Before you can use instant messaging, you must subscribe to the service.
Login — to connect to the instant messaging service. To set the phone to automatically connect to the instant messaging service when you switch on the phone, select Menu > Instant messages, connect to the instant messaging service, and select My settings > Automatic login > On phone start-up.
indicates a blocked contact. See Block and unblock messages p. 95. indicates that you have received a new message from a contact. You can add contacts to the list. See Contacts for instant messaging p. 95. Select Groups > Public groups (dimmed if groups are not supported by the network). The list of bookmarks to public groups provided by the network operator or service provider is displayed. To start a conversation, scroll to a group, and select Join.
Read a received instant message In the standby mode, when you are connected to the instant messaging service and you receive a new message that is not a message associated with an active conversation, New instant message is displayed. To read it, select Read. If more than one message is received, the number of messages, followed by new instant messages, is displayed. Select Read, scroll to a message, and select Open.
To appear as being offline, select Availability > Appear offline. When you are connected to the instant messaging service, are not visible to others. indicates that you are online and that you Contacts for instant messaging To add contacts to the instant messaging contacts list, do the following: 1. Connect to the instant messaging service, and select IM contacts. 2. Select Options > Add contact, or if you have no contacts added, select Add.
Public groups You can bookmark public groups that your service provider may maintain. Connect to the instant messaging service, and select Groups > Public groups. Scroll to a group to which you want to chat, and select Join. If you are not in the group, write your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group. To search for a group, select Groups > Search groups.
16. Settings ■ Profiles Your phone has various setting groups, called profiles, which you can customize for different events and environments. Select Menu > Settings > Profiles and the desired profile. Select from the following options: Activate — to activate the selected profile Personalise — to personalize the profile. Select the setting you want to change, and make the changes. Timed — to set the profile to be active until a certain time up to 24 hours, and set the end time.
■ Themes A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme, and a ringing tone. Select Menu > Settings > Themes and from the following options: Select theme — to set a theme in your phone. A list of folders in My Items opens. Open the Themes folder, and select a theme. Theme downloads — to open a list of links to download more themes ■ Tones You can change the settings of the selected active profile.
To disable the active standby mode, select Menu > Settings > Display > Standby mode settings > Active standby > Off. Standby settings Select Menu > Settings > Display > Standby mode settings and from the following options: Active standby > My active standby — to display the active standby.
Power saver To save some battery power, select Menu > Settings > Display > Power saver. A digital clock is displayed when no function of the phone is used for a certain time. Sleep mode To save most battery power, select Menu > Settings > Display > Sleep mode. The display turns completely black when no function of the phone is used for a certain time. Font size To set the font size for reading and writing messages and viewing contacts and Web pages, select Menu > Settings > Display > Font size.
Left selection key To select a function from the list for the left selection key, select Menu > Settings > My shortcuts > Left selection key. See also Standby mode p. 26. To activate a function in the standby mode if the left selection key is Go to, select Go to and the desired function on your personal shortcut list. Select Options and from the following options: Select options — to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark or Unmark.
Voice commands You can call contacts and carry out phone functions by saying voice commands. Voice commands are language-dependent. To set the language, see Voice playback language in Phone p. 109. The phone voice commands are active by default. Select Menu > Settings > My shortcuts > Voice commands and a folder. Scroll to a function. indicates that the voice tag is activated. . To play the activated voice command, select Play. To use voice commands, see Enhanced voice dialing p. 32.
Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth technology communicate using radio waves, your phone and the other devices do not need to be in direct line-of-sight, although the connection can be subject to interference from obstructions such as walls or from other electronic devices.
Bluetooth settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility or My phone's name. Operating the phone in hidden mode is a safer way to avoid malicious software. Do not accept Bluetooth connectivity from sources you do not trust. As another alternative, - switch off the Bluetooth functionality. This will not affect other functionalities of the phone.
Packet data WCDMA and general packet radio service (GPRS) are network services that allow mobile phones to send and receive data over an Internet protocol protocol (IP)based network. WCDMA and GPRS are data bearers that enable wireless access to data networks such as the Internet. Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability of EGPRS and data transfer speed, contact your network operator or service provider.
To define the settings for the packet data connections from your PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, and activate the access point you want to use. Select Edit active access point > Alias for access point, enter a name to change the access point settings, and select OK. Select Packet data access point, enter the access point name (APN) to establish a connection to a network, and select OK.
To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from the list, other than Server synchronisation or PC synchronisation. According to the settings, the selected data is copied or synchronized. The other device also must be activated for receiving data. Data transfer without SIM card Your phone allows data transfer when the SIM card is not inserted.
If the contacts or calendar are full, synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete. USB data cable You can use the USB data cable to transfer data between the memory card inserted in the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite.
Call waiting > Activate — to have the network notify you of an incoming call while you have a call in progress (network service). See Call waiting p. 33. Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each call Send my caller ID > Yes — to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network.
Operator selection > Automatic — to set the phone to automatically select one of the cellular networks available in your area. With Manual you can select a network that has a roaming agreement with your home network operator. Confirm SIM serv. actions — See SIM Toolkit (STK) p. 114. Help text activation — to select whether the phone shows help texts Start-up tone — to select whether the phone plays a tone when the phone is switched on.
Select Menu > Settings > Configuration and from the following options: Default config. settings — to view the service providers saved in the phone. Scroll to a service provider, and select Details to view the applications that the configuration settings of this service provider support. To set the configuration settings of the service provider as default settings, select Options > Set as default. To delete configuration settings, select Delete. Activ. default in all apps.
Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required. Fixed dialling — to create, edit, and activate a list of phone numbers or prefixes. When the list is activated, you can only call or send messages to the numbers on the list. If the SIM card does not support this option, Fixed dialling is hidden.
To extend the permissions for a file, select Options and the corresponding option for the file type, such as Activate theme. You can send certain types of protected files to your friends, and they can buy their own activation keys. This phone supports OMA DRM 1.0. ■ Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett.. Enter the security code. Copyright © 2006 Nokia. All rights reserved.
17. SIM Toolkit (STK) Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability, rates, and information on using SIM ToolKit services, contact your SIM card vendor, for example, network operator, service provider, or other vendor.
18. PC connectivity You can send and receive email, and access the Internet when your phone is connected to a compatible PC through an IR, Bluetooth wireless technology, or USB data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service).
For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call. Copyright © 2006 Nokia. All rights reserved.
19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/ batterycheck. To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
• Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders. ■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed.
as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.87 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. Copyright © 2006 Nokia. All rights reserved.
Index A call waiting .................................................... 33 calls .................................................................. 91 camera ............................................................. 39 camera key ..................................................... 25 camera settings ............................................ 40 certificates ..................................................... 53 charge level ....................................................
protected files ..................................... 113 E keypad lock .................................................... 30 L e-mail application ........................................73 emergency calls .......................................... 124 end key .............................................................25 ending a call ...................................................32 enhancements settings ............................ 111 equalizer .................................................
PC Suite ........................................................ 116 permissions for a protected file ............. 113 personalize ............................................98, 100 phone settings ............................................ 110 PIN code ..........................................................16 plug and play service ...................................23 power key ........................................................25 power saver .................................................
U unlock keypad ................................................30 USB data cable ........................................... 109 V vibrating alert ................................................99 voice commands ........................................ 103 voice dialing ...................................................32 voice messages ..............................................76 voice recorder ................................................ 44 volume keys ........................................
