Vodafone 1231 User Guide
Product Safety Information Read the Safety Information section of this user guide on page 2 Do not use while re-fuelling Do not use hand-held while driving This device may produce a bright or flashing light For body-worn operation maintain a separation of 15 mm Do not dispose of it in a fire Small parts may cause a choking hazard Avoid any contact with magnetic media This device may produce a loud sound Avoid Extreme Temperatures Keep away from pacemakers and other personal medical devices Avo
FCC COMPLIANCE STATEMENT This device complies with part 15, part 22 and part 24 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Changes or modifications made to this equipment not expressly approved by ZTE for compliance could void the user's authority to operate the equipment. Health and safety information The phone with internal antenna has been tested for compliance with FCC RF Exposure (SAR) limits and is complied with FCC RF exposure compliance requirements.
Distraction Driving Full attention should be given to driving at all times in order to reduce the risk of an accident. Using a phone while driving (even with a hand free kit) causes distraction and can lead to an accident. You must comply with local laws and regulations restricting the use of wireless devices while driving. Operating Machinery Full attention must be given to operating the machinery in order to reduce the risk of an accident.
• • • • • • • Do not drop, throw or try to bend your phone or its accessories. Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories. Do not paint your phone or its accessories. Do not attempt to disassemble your phone or its accessories, only authorized personnel must do so. Do not expose your phone or its accessories to extreme temperatures, minimum - [5] and maximum + [50] degree Celsius. Please check local regulations for disposal of electronic products.
Antenna Do not touch the antenna unnecessarily.
Air Bags Do not place a phone in the area over an air bag or in the air bag deployment area. Store the phone safely before driving your vehicle. Seizures/ Blackouts This phone is capable of producing bright flashing lights. Repetitive Motion Injuries • • • • • To minimize the risk of RSI, when texting or playing games with your phone: Do not grip the phone too tightly. Press the buttons lightly.
Bright Light The phone is capable of producing flash of light or use as a torch, do not use it too close to the eyes. Phone Heating Your phone may become warm during charging and during normal use. Electrical Safety Accessories Use only approved accessories. Do not connect with incompatible products or accessories. Take care not to touch or allow metal objects, such as coins or key rings, to contact or short-circuit in the battery terminals.
Interface General Statement on Interface Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids. I Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a mobile phone and a pacemaker to avoid potential phone interference with the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket.
Hospitals Switch off your wireless device when requested to do so in hospital, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment. Aircraft Switch off your wireless device whenever you are instructed to do so by airport or airline staff. Consult the airline staff about the use of wireless devices on board the aircraft, if your device offers a ‘flight mode’ this must be enabled prior to boarding an aircraft.
Blasting Caps and Areas Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.
About Your Vodafone 1231 The mobile device Vodafone 1231 described in this guide is approved for use on the GSM 900/1800/1900 network. If you need more information about GSM networks get in touch with Vodafone customer care or visit www.vodafone.com Your Vodafone service number is +xx xxx xxxx. When using the features in this device, obey all laws, respect the privacy and legitimate rights of others, including copyrights.
Network Services To use the phone you must have a service agreement with Vodafone. Some of the features may require special networksupport and service provisioning. Contact Vodafone customer care for any guidance. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as e-mail, browsing, multimedia messages and content downloading, require network support and service provisioning for these technologies.
Contents 1 Getting Started ................................................................................................................ 18 1.1 1.2 1.3 1.4 1.5 1.6 2 Using the Phone.............................................................................................................. 39 2.1 2.2 2.3 2.4 2.5 2.6 2.7 3 Starting Up........................................................................................................................18 Your Phone ..............................
4 Personal Information ...................................................................................................... 58 4.1 4.2 4.3 4.4 4.5 5 Contacts............................................................................................................................58 Calendar ...........................................................................................................................62 Tasks...............................................................................
7.7 GPS ................................................................................................................................106 8 More Applications ......................................................................................................... 108 8.1 8.2 8.3 8.4 8.5 9 File Explorer ...................................................................................................................108 Microsoft® Office Mobile........................................................
1 Getting Started 1.1 Starting Up Install the SIM Card and Battery 1. Hold your SIM card with the cut corner oriented as shown below and then insert it into the card holder properly. See Figure 1. 2. Insert the battery by aligning the gold contacts on the battery with the gold contacts in the battery compartment on the phone. Push down the battery until it clicks into place. See Figure 2. 3. Replace the battery cover and press it gently until you hear a click. See Figure 3.
Remove the Battery and SIM Card 1. Ensure that your mobile phone is switched off. 2. Remove the battery cover. See Figure 4. 3. Pull the battery up and remove it from the mobile phone. See Figure 5. 4. Pull the SIM card out and remove it from the mobile phone. See Figure 6. Figure 4 Figure 5 Figure 6 Charge the Battery The new battery is not fully charged. To charge the battery, you need to: 1. Open the cover of the adapter slot on the bottom of the phone. See Figure 7. 2.
4. When charging in the power-off mode, the battery icon is flashing. When charging is completed, the battery icon stops flashing. When charging in the power-on mode, the icon appears on the title bar of the Home screen. When charging is completed, the battery indicator appears on the title bar. 5. Disconnect the charger when the battery is fully charged. Figure 7 Figure 8 MicroSD Card Your phone supports MicroSD cards. It expands the storage capacity of the phone.
To insert & remove MicroSD card 1. Insert: Open the cover of MicroSD card slot on the left side of the phone. See Figure 9. Insert the card with the metal contacts facing upwards until it clicks to the right position. See Figure 10. 2. Remove: Press and release the card to pop it out, and then remove it.
Power On/Off Your Phone Make sure that your SIM card is in your mobile phone and the battery is charged. Hold the Power key to power on/off the phone. The phone will automatically search for the network. Note: You may need to enter the PIN (Personal Identification Number) code if you have enabled the SIM PIN. (See "To use the SIM PIN" in Section 5.3 Management.
1.
Item Name Function 1 Earpiece Listen to a phone call. 2 Display Screen View information on the display screen. 3 Home Key Press to go to the Home screen. 4 Left Soft Key Press to perform the command shown in the label above the key. 5 Dial Key Press to dial a phone number, answer a call, switch to another call, or put a call on hold. 6 Navigation (Up/ Down/Left/Right) Keys /Center OK Key Use to scroll up, down, left, or right. Press the center key to use as the OK key.
Item Name Function 12 Fn Key Press to change input mode. 13 Tab Key Press to enter a tab symbol. 14 Sym Key Press to enter more symbols. Hold to lock keyboard. 15 Camera Key Press to open the Camera program. 16 Volume Keys Press the two keys to adjust the volume. 17 MicroSD Slot Open the cover to install MicroSD card. 18 USB Interface Open the cover to connect the USB cable or charger. 19 Microphone Speak into the microphone when making a phone call or recording voice.
Back components Figure 12 Item Name Function 23 Speaker Listen to system sound, conversation, and music. 24 Camera Lens Built-in CMOS lens with 1.3-megapixel camera.
Item Name Function 25 Camera Flash Provide flashlight when taking picture. 26 Self-photo Mirror Take a photo of yourself by aligning your reflection in this mirror. 27 Battery Cover Open the battery cover to install or remove the battery and SIM card. Note: In this manual "press a key" means you press a key and then release it; and "hold a key" means you press a key and hold on for two seconds or more. 1.
The Home screen appears when you turn on the phone. Use the Navigation keys to scroll down the Home screen to see more information. The default Home screen displays important information, such as: • Current date and local time, • Number of SMS/MMS messages/Voicemails, missed calls, number of new Outlook e-mails, Vodafone business e-mails, (For Outlook e-mails, see Section 3.2. For Vodafone e-mail, see Section 3.
Common Status Indicators on the Title Bar of the Home Screen Figure 14 Indicator What it means Missed call New message New mail Bluetooth connection is active Bluetooth on New Windows Live TM message Calls are forwarded EDGE in use GPRS in use
Indicator What it means GPRS roaming Vibrate mode Sound off Speakerphone on Bluetooth headset detected Bluetooth headset playing music Battery charging Battery full Battery low Maximum signal strength Searching for phone service Phone is turned off No phone service EDGE available GPRS available Call on hold Voice call in progress Connection is active No SIM card inserted
1.4 Input Methods Switch Between Different Input Modes Press the Fn key to switch between input modes when you need to enter characters, numbers, or symbols. The input mode indicator is displayed on the title bar. Enter Numbers and Symbols Use the Fn key to switch between the following modes: for numeric or symbol input. You can enter various punctuation symbols and numbers. For example, press the “P” key to get “@”, press the “P” key again, you will get the “p”.
Figure 15 Enter English Use the Shift key to switch between the following modes: for lowercase text input. All lowercase. for uppercase text input. First letter in uppercase, followed by lowercase letters. for continuous uppercase text input. All uppercase. In these modes, you can: • Use the Back key to delete a single character, and hold this key to clear all inputs. • Use the Enter key to turn to the next line. • Use the Tab key to jump to the next input text field.
1.5 Basic Operations Screen Navigation Start menu In the Home screen, press Start to get the Start menu. It shows the shortcuts for the software bundled with the phone and the application programs installed by the user. You can use the Navigation keys to move through these application programs (see Figure16), and press the OK key to run them. To show more programs, press More.
To go back to the previous page Press the Back key to go back to the previous screen. Note: In editing mode, you can press the Back key to delete text. In the File Explorer, press the Back key to go back to the previous folder. Quick List Short press the Power key to access the Quick List. The Quick List includes powering off the phone, locking your phone and keypad, opening Task Manager & Wireless Manager, and choosing a different profile. The Quick List provides a quick access to the profile.
Lock/Unlock the Keypad You can use the keypad lock to avoid unintentional operations. You can answer an incoming call with the regular operation when the keypad is locked. To lock the keypad Hold the Sym key at any screen until a locked screen appears. To unlock the keypad Press the Left Soft key, and then press the Sym key as indicated on the screen. Adjust Earpiece Volume Press the Volume keys to adjust the volume for headset, music, games, and ringtone tests.
Vodafone Live! Vodafone live! brings you new and exciting ways to communicate, to access information, music and games. You can find more details on the Vodafone Website (www.vodafone.com). Note: This feature might not be supported by all operators. Outlook E-mail The Outlook E-mail service allows you to set up multiple e-mail accounts including business and personal e-mail accounts. You must set up a POP3/IMAP4 e-mail account in order to send/receive e-mails through remote servers. See Section 3.2.
Set the time zone along with the current time and date. The time and date information will affect the calendar reminders and the alarm ring time. To set the date and time, select Date and Time. Select the time zone and then use the numeric keys to enter the current date and time. To set the alarm, select Alarm 1 or Alarm 2. Enter the alarm ring time, and set the alarm as on/off. Then set the sound, type and volume. PDF Reader Select Start > Organiser & Tools > PDF Reader.
Camera Select Start > Entertainment > Camera. You can capture still/video images with the 1.3 megapixel handset camera and send images via MMS. See Section 6.1. Games Select Start > Entertainment > Games. There are two built-in games: Bubble Breaker and Solitaire. Windows Media Select Start > Entertainment > Windows Media. Play downloaded music and video images as well as those recorded/captured on handset. See Section 6.3.
2 Using the Phone 2.1 Starting the Phone Function Disable & Enable Phone Function When using this phone, you can control wireless functions. When the phone function is off, you will not be able to receive calls, send/receive messages, or use GPRS to connect to wireless mobile network. But other handset functions such as browsing the calendar, listening to music, or playing games, can still be used. 1. Press the Power key to activate the Quick List, and then select Wireless Manager.
Enter SIM PIN Each time you turn on the phone or activate the phone function, you will need to enter the SIM card PIN provided by Vodafone if you have enabled the PIN code. Enter the phone’s SIM PIN code and press Done. Wait for the phone to verify the PIN code. Warning! If you enter your PIN incorrectly for three times, the SIM card will be locked automatically. Contact Vodafone to obtain the PIN Unblocking Key (PUK) code to unlock the SIM card. 2.2 Making a Call Make a Call from the Phone Screen 1.
2. Select the contact you wish to call. Press the Dial key to dial the default number of the contact. To learn more about Contacts, see Section 4.1. To dial from contacts’ details Select a contact; then press the OK key to open its Contact details. Select the contact’s number you wish to call, and then press the Dial key. Make a Call from Call History On the Home screen, select Call History (if displayed) or select Start > Call History. Select a name or number, and press the Dial key to dial.
Make International Calls Hold the “0” key until “+” appears. Enter the full phone number, and press the Dial key, for example: +49-123-12345678 in the following format: +country code-area code-phone number. Make Speed Dial Press and hold the speed key to call in the Home screen. You can set speed dial entries/ shortcuts for the frequently dialed contact numbers. To learn how to use Speed Dial, see Section 2.6. 2.
2.4 In-Call Options During a call, press Menu to access in-call options. Hold the Call During a call, to hold it, select Menu > Hold, or press the Dial key. To cancel, press Unhold, or press the Dial key again. Note: It needs network support. Contact Vodafone for more information. Enable Call Waiting You can enable Call Waiting so that the phone will notify you of a new incoming call while you have a call in progress. 1. On the Home screen, select Start > Settings > Phone > Call Waiting. 2.
Set up a Conference Call 1. Either put a call on hold (select Menu > Hold) and dial a second number, or answer another incoming call. 2. Select Menu > Conference, then the Conference is created. Note: It needs network support. Contact Vodafone for more information. Turn On/Off Speakerphone Select Menu > Speakerphone On. After speakerphone is activated, the icon title bar. appears on the To disable the speakerphone, select Menu > Speakerphone Off.
Search for a Number During a call, press Menu first, and then select Contacts or Call History. View Calendar During a call, press Menu first, then select View Calendar. 2.5 Dialing up Voicemail To listen to voicemail messages, you can dial the voicemail number (provided by Vodafone) from the phone screen. You can also hold the speed dial key 1 directly on the Home screen. The numeric key 1 is set up as the voicemail number by default. Note: Voicemail needs network support.
2. Select Menu > Add to Speed Dial. Select keyboard assignment, then press Done. You can set 0-99 as Speed Dials. Edit a Speed Dial Select Start > Organiser & Tools > Speed Dial, and then select the speed dial entry you wish to edit, then press Done. Use Speed Dial You will only need to hold the corresponding speed dial entry/shortcut key to dial up the contact or access the application program. For example, if 15 is set for Calendar, you have to press 1 and then hold 5 to quickly launch Calendar. 2.
3 Messaging Messaging is where all of your e-mail, SMS, and MMS accounts are located. When you receive a new message, you can open it from the Home screen. Simply scroll to the row where the new message is located and select it to read. To access your message accounts, select Start > Messaging and then select the account you want to read. 3.1 Messages The handset will alert you for the unread message(s) with the icon received messages are categorized as read or unread . on the title bar.
3. Press Send to send the message. To add new MMS On the Home screen, select Start > Messaging > Messages to access the messages list screen, select Menu > New > MMS. 1. Enter the mobile phone number of one or more recipients, separating them with a semicolon (;). To access phone numbers from Contacts, select Menu > Recipients in To, then select From Contacts or From Call History. Select a contact from the list and press the OK key.
5. Select Insert Audio to insert an audio clip. Select an audio clip on the Select Audio screen. To record a new audio clip, select Menu > Capture > Audio. 6. Select Menu > Attachments to add vCard, vCalendar and File. 7. Select Menu >Template to use a template or save the current message as a template. 8. Select Menu >Preview Message to preview the current message. 9. Press Send to send the message. Note: To remove the picture, video, text, or audio, select the item and press the Back key.
Other Actions To reply messages Select Menu > Reply > Reply / Reply All / Forward to reply to the sender/all persons listed in To and CC boxes/forward the message to someone else. To switch messages folders Select Menu > Folders. Open the messages folder list. Switch to a different messages folder. There are five folders in Messages: • Deleted Items: Store deleted messages. • Draft: Store message drafts. • Inbox: Store all received and sent messages.
To delete message Select the message, and then select Menu > Delete. Then confirm. Deleted messages will be moved to the Deleted Items folder. To configure message settings On the Messages list screen, select Menu > Tools > Options to configure various settings in Message. Display options: 1. Show date and time in the message list: Choose whether to display date and time in the message list. 2. Sort messages by: Choose the sorting column or the sorting order.
Signatures options: 1. Select an account: Select an account you wish to set. 2. Use signature with this account: Choose whether to use the signature with your selected account. 3. Include when replying and forwarding: Choose whether to include the signature when replying or forwarding e-mail. 4. Signature: Enter or edit your signature here. Account Settings options: 1. Request delivery notifications: Choose whether to receive a notification when the message reaches the recipient. 2.
Other options: 1. Display account picker when opening Messaging: Choose whether to enable this function. 2. Warn when deleting messages in the message list: Choose whether to enable this function. 3.2 Outlook E-mail Configure POP3/IMAP4 E-mail Account If you want to send/receive e-mails through remote servers, you have to set up a POP3/IMAP4 e-mail account. On the Home screen, select Start > Messaging > Setup E-mail to set your account. 1. Enter your e-mail address and password, and then press Next. 2.
Create and Reply to E-mails To compose and send an e-mail 1. Select Start > Messaging, and then select an e-mail account. 2. Select Menu > New. 3. Enter the e-mail address of one or more recipients, separating them with a semicolon (;). To access e-mail addresses stored in Contacts, select Menu > Add Recipient in To. Select a contact from the list and press OK. You can press the Up key to find the field for "Bcc" and "Cc". 4. Enter a subject and compose your message.
View and Reply to E-mails The Home screen will display the e-mail item when a new e-mail message arrives. Select E-mail then press the OK key. You will also be able to browse the e-mail from the Messaging. Select the e-mail to be browsed, and then press OK. To read incoming messages By default, only the first few kilobytes of a message are shown when you open and read an incoming message.
3.3 Vodafone E-mail With VF E-mail you can access up to five separate Internet based e-mail accounts and gain anywhere real-time access to your e-mail and attachments on your mobile phone. After setting up the VF E-mail software on your phone and connecting to your Internet based e-mail account, your e-mails will automatically be sent to your phone as soon as they arrive in your Internet mailbox. You will be able to manage your e-mail and send and receive attachments from wherever you are.
Send and receive e-mails You interact with the VF E-mail application. VF E-mail works in the background to synchronize the Inbox on your phone with your e-mail service provider. To send an e-mail you go in to the e-mail Inbox and select Menu > New. You can also reply or forward any e-mail from your Inbox. Make sure that you always select VF E-mail when you send an e-mail message. Read and add attachments The attachment is indicated by a paperclip symbol next to the header in the Inbox.
4 Personal Information 4.1 Contacts Select Start > Contacts. Open Contacts application program. Open Contacts from Home Screen You can add new contacts along with their information. Setting up communication information for the contact will allow you to connect with the person quickly or browse the contact's information. Contacts will be saved in the phone memory or in the SIM card. If you store the information in the SIM card, you can fill the name and a number.
To easily identify the caller, you can assign a custom ringtone and a picture to each Outlook contact. To assign a custom ringtone, scroll down to Custom ring tone, and select the desired ringtone. To assign a picture to a contact, scroll down to Picture and Select a picture to select the picture you want. To remove the picture, select Menu > Remove Picture. 3. Press Done. If someone who is not in your list of contacts calls you, you can quickly save the number to contacts by pressing Save.
View the Contact List with Different Sort Column If you have entered information under Company for your Outlook contacts on your phone, you can switch between Company mode and Name mode by selecting Menu > View By > Company/Name. In Company view mode, you can quickly locate the contacts who work for a specific company. You can filter the contact list by categories. In the contact list, select Menu > Filter and then select a category. And then select the category if you have set the contacts’ categories.
Send Contact Information • Select Menu > Send Contact > Beam. Select contact information to send. Select the device. Then press Beam. Note: Make sure that both transmitter and receiver have activated the Bluetooth function. • Select Menu > Send Contact > Messages. Select the contact information that you want to send. Then press Done. • Select Menu > Send as vCard. Enter the recipient in To of the MMS message, and then press Send.
4.2 Calendar Select Start > Organiser & Tools > Calendar. You can use the calendar to schedule appointments, including meetings and other events. Your appointments will be displayed on the screen as is scheduled. You can choose to Dismiss the reminder or use the Menu set the snooze time. On the Reminder screen, select Menu > View Item to view the details. Add New Appointments 1. Select Menu > New Appointment. 2. Enter information about the appointment. 3. Press Done.
• Attendees: If you select Add Required Attendee… or Add Optional Attendee…, and choose the contact as the attendee, it will send invitation to them. • Reminder: Set a notification time to let the phone alert you a certain period of time before an appointment. • Occurs: Set the re-occurring times or frequency. • Status: Choose the appointment status. Each appointment status is represented by a color block in the view screen.
1. Select an appointment, then select Menu > Send as vCalendar. 2. Enter the recipient in To. 3. Press Send. Configure Calendar Options Select Menu > Tools > Options to open the Calendar options settings screen. Select the item to set up. Options include: 1. Start in: Set the default view option for Calendar. 2. First day of week: Choose a day as the first day of the week. 3. Week view: Choose how many days to display for the weekly view. 4.
4.3 Tasks Select Start > Organiser & Tools > Tasks. Add New Tasks 1. Select Menu > New Task. 2. Enter the task information. 3. Press Done. The detailed task information includes: • Subject: Enter the subject. • Priority: Choose the priority level of the task. • Status: Confirm whether the task is completed or not. • Start/Due date: Set the start/end date of the task. • Occurs: Set the re-occurring times or frequency.
View the Task List with Different Sort Column To sort the list, select Menu > Sort by, and select a sort option. To filter the list by category, select Menu > Filter, and select the category to be displayed. Mark a Task as Completed Move to the completed task. Press Complete. If you want to activate this task again, you can move to it and press Activate. To Send a Task In the Tasks list, select the task you want to send and select Menu > Beam Task, then select device to exchange, and press Beam.
Play a Voice Note Select a voice note to playback, and press the OK key. Or select Menu > Play. To stop, press Stop. Rename a Voice Note 1. Select Menu > Rename. 2. Enter the new name. 3. Press Done. Delete a Voice Note 1. Select the voice note to delete. 2. Select Menu > Delete. 3. Press Yes. Note: If you delete a voice note that has a default name, such as Recording1, this name becomes available for a new voice note.
4.5 SIM Manager Select Start > Organiser & Tools > SIM Manager to open the SIM manage tool. With SIM Manager, you can manage the contacts information in your SIM card and perform actions such as select, delete, copy to Outlook, etc. You can select Options > Select All to select all SIM card contacts to perform the action. If you want to manage the contacts information in the phone memory, you can select Options > Outlook Contacts.
5 Settings 5.1 General Settings Select Start > Settings to open the homepage of Settings. Select More to see more settings. Set up the Home Screen The Home screen is the starting place for most tasks you perform on your phone. You can get access to all features and programs from the Home screen. To customize the Home screen: Select Home Screen. You can set the Home screen layout, Show recent programs, Color scheme, Background image, and Time out for the Home screen, see Figure 17.
Set the Regional Information Your phone should already be set up with the regional settings that are appropriate for your locale. Select Regional Settings to set the Language, Locale, Short / Long date style, Time format, Positive / Negative number and Positive / Negative currency. Note: If you change the locale option, the format of the remaining options (such as date, time, and currency) will be changed automatically according to the locale you specify.
To edit a profile In the Profiles choose the one you want to edit, then select Menu > Edit to modify the settings. The profile settings include: name of the profile, ring type and volume, reminder type and volume, notification type and volume, and system sound volume. To cancel without saving changes, press Cancel. To revert to the default profile settings, select Menu > Reset to default.
• Backlight brightness: Set backlight brightness of the screen. • Display time out: Set display timeout to automatically shut off the screen. Reset to Factory Default Settings Select Reset To Factory Settings. Follow the instructions displayed on the screen to reset the phone. The phone will restart after reset. Warning! After you reset your phone to factory setting, all the information and settings you have saved on your phone will be lost.
5.2 Function Settings Select Start > Settings to open the homepage of Settings. Select More to see more settings. Set the Phone Function Select Phone, the phone function settings include: • Auto Answer: Set the auto answer time. • Call Barring: Restrict incoming and outgoing calls. • Call Forwarding: Choose to use call forwarding. • Call Options: Set Any key answer, Show SIM contacts, Voice mail number, Text messages service center number, Country code, and Area code.
Set up Connections See Section 2.1 for Wireless Manager in Disable & Enable Phone Function. See Section 7.4 for Bluetooth. See Section 7.1 for Dial-up. See Section 7.1 for GPRS. For other connections, consult Vodafone or the network administrator. Set up Accessibility Select Accessibility to set options as follows: • System font size • Multipress time out • Confirmation time out • In-call alert volume Set the Text Input Select Text Input Settings to set the input method.
5.3 Management Select Start > Settings to open the homepage of Settings. Select More to see more settings. Add and Remove Programs Before you purchase additional programs for your phone, make sure that they are compatible with the Windows Mobile® 6.1 Standard operating system. To add a program 1. Download a program to your PC (or insert the disc that contains the program into your PC). Make sure that you select a program developed for your phone and processor type. 2.
To use the device lock To enable the phone lock: Select Security > Device lock, and check the Prompt if device unused for box, and set the timeout. Choose the Password type, then enter and confirm your password. Note: Once you configure the phone lock settings, you can enable the phone lock from the Quick List directly without configuring the settings again. After the phone lock is activated, you have to enter the password to unlock it after timeout.
Vodafone to obtain the PUK code to unlock the SIM card. To disable the SIM PIN: You have to enter the correct PIN code to disable the use of the PIN code. After it is disabled, each time you turn on the phone, you will not be asked to enter the PIN code. Select Security > Disable SIM PIN, then enter your PIN. To change the SIM PIN: When the new SIM PIN is enabled, you must enter this PIN to unlock the phone. Select Security > Change SIM PIN. In Old PIN, enter the current PIN.
Set up Windows Update Select Windows Update. Press Next to choose to manually or automatically check for and download important updates on the Microsoft Web site. It will connect to the Internet to download updates on your device with the latest security patches or fixes. For more information, read the description on the Windows Update screen. Managed Programs Select Managed Programs to view a list of programs that are currently loaded on you phone.
6 Experiencing Multimedia 6.1 Camera Use Camera To open camera On the Home screen, select Start > Entertainment > Camera to launch the camera program. Tip: You can also launch your camera program from anywhere by pressing the Camera key. Camera standby screen It displays Standby on the camera screen after 30-second idle as shown in Figure18. Press any key in the Qwerty Keyboard to activate it. Press Thumbnails to open the Pictures & Videos program.
Figure 18 To exit camera Press the End key. Take a Photo or Capture a Video Clip To switch between taking a photo and recording video clip, press Menu in camera screen, select Still or Video. Aim the camera at the subject and then press the OK key or the Camera key to take the shot. To capture a video, press the OK key or the Camera key to start recording; press again to stop. During video recording process, you can pause/resume by pressing the Right Soft key.
To use zooming Before capturing a photo, press the Up key on your phone to zoom in, press the Down key to zoom out. Or press Menu, and then select Zoom. To adjust brightness To adjust the brightness, press Menu, and then select Brightness. Tip: In all capture modes, press the Left/Right key to change the brightness value. Configure Your Camera Press Menu to configure your camera, including: • Mode: There are three modes to capture picture.
• Options…: To customize the settings for the pictures and videos. General: You can resize a picture to match your requirement before sending it by e-mail. You can also change the rotating orientation in this setting screen. Slide Show: Your phone has two orientation modes: Portrait and Landscape. You can decide whether to play screensaver when your phone is connected to PC and idle for 2 minutes. Camera: Pictures are saved into your phone by default.
press View/Play or the OK key to open it. Copy a Picture or Video Clip to Your Phone You can copy pictures and video files from your PC to the My Pictures folder on your phone, and then view them on your phone. For more information about copying files from your PC to your phone, see Windows Mobile Device Center or ActiveSync Help on your PC. Note: You can also copy pictures and video files from your PC to your phone using a memory card.
6.3 Windows Media Player Mobile You can use Microsoft Windows Media Player Mobile to play digital audio and video files. To open Windows Media Player Mobile, select Start > Entertainment > Windows Media. Formats Supported The following file formats are well supported by this phone. Video: .wmv/.asf/.mp4/.3gp/.avi Audio: .wma/.mp3/.mid/.midi/.rmi About the Controls By default, these controls are assigned to Windows Media Player Mobile functions.
Decrease the volume Press the Down key Turn the sound on or off quickly (mute) Press # Switch to full screen during video playback Press 0 Change rating Press * Play the items in the Now Playing play list Shuffle/Repeat in random order/repeatedly. Tip: To change the assigned hardware keys, on the Playback screen, select Menu > Options > Buttons. About Licenses and Protected Files Some media files have associated licenses that protect them from being unlawfully distributed or shared.
Play Media To play a media file To play media files from the library, select Menu > Library to open the Library screen. If necessary, select a library. Then select the file from the catalogues (for example, My Music or My Playlists), move to an item (such as a song, album, or artist name), press Play to play the media file on the player screen. To play media files from the phone or the storage card, on the Library screen, press Menu, and then select Library > My device/Storage Card.
• Shuffle/Repeat >Repeat: Play the items in the Now Playing playlist repeatedly. • Full Screen: Display the current playing video in full screen mode. • Options: Adjust various Windows Media Player Mobile options, including network, skin, and hardware key options, etc. • Properties: Display information about the currently playing file. • About: Display information about Windows Media Player Mobile, such as the version number.
To update media library You can manually update the library to ensure that it contains new files that you recently copied to your phone or storage card. Select Menu > Update Library to manually update the library list. On the Library screen, select Menu > Update Library to update the media library. The new media files, such as the video clip shot by the camera, will be added into the library.
Install and Run MIDlets/MIDlet Suite To install MIDlets from the Internet 1. On the Home screen, select Start > Programs > Applications. 2. Select Download Application to open the Internet Explorer. 3. Locate the MIDlet/MIDlet suite while connected to the Internet. 4. Select the MIDlet/MIDlet suite to download. 5. To start installing the MIDlet/MIDlet suite, press Yes. 6. Press Install to confirm the installation. Note: You can cancel the installation at any time.
To run MIDlets/MIDlet suites on your phone 1. On the Home screen, select Start > Programs > Applications. 2. Select a MIDlet from the list. 3. Press OK key or press Launch to run the MIDlet. Manage MIDlets/MIDlet Suite You can organize the MIDlets/MIDlet suites into folders. You can also uninstall the MIDlets/MIDlet suites. To uninstall a MIDlet/MIDlet suite Before you uninstall a MIDlet/MIDlet suite, make sure that it is not running. 1. On the Java Apps screen, move to the MIDlet/MIDlet suite. 2.
7 Getting Connected 7.1 Connecting to the Internet Ways of Connecting to the Internet Your phone’s networking capabilities allow you to access the Internet or your corporate network at work through wireline and wireless connections. You can connect to the Internet by: GPRS or Dial-up. Note: You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
2. In Description, enter a name for the connection. 3. In Connects to, select the type of network to which you will connect. 4. Enter the Vodafone GPRS Access point information. 5. Enter the appropriate information in the remaining fields, if required by Vodafone. 6. Press Done. Dial-up You can use your phone to dial up to connect to the Internet or to your corporate network. To set up a new dial-up connection 1. On the Home screen, select Start > Settings > Connections > Dial-up > New. 2.
2. Configure each connection type. You can choose Automatic to allow the phone to set a service provider for each connection by default. 3. Select Menu > Options. 4. Choose the appropriate information in the remaining fields. 5. Press Done. Tip: You may need to set URL exception in order to view some pages on your company Intranet. On the Home screen, select Start > Settings > Connections > Menu > Advanced. Select Menu > Work URL Exceptions > Menu > Add. In URL Pattern, enter the URL name.
Enter the text when the cursor is in the text field. Press the OK key to send the entered text. Use the Navigation keys to move around the screen. Use the Navigation keys to move to the hyperlink; press the OK key to link to the web page. Press the Back key to go back to the previous page. Open Web Pages In Internet Explorer, you can open web pages in the following ways: • Select Menu > Favorites to expand Favorites list, then open a web site. • Select Menu > Address Bar.
page without doing a horizontal scroll. • Desktop: Switch to Desktop view. It retains the same layout and size as the Desktop. When browsing web pages, you need to do both horizontal and vertical scrolling of the page. Full Screen: Switch to Full Screen view. To exit the Full Screen mode, press the Left/ Right Soft key and cancel Full Screen from the Menu. Show Pictures: Turn off Show Pictures. To open Show Pictures, re-select it. Tools: Send Link…: Send the current link by SMS/MMS/E-mail.
or History, then press Clear to clear corresponding memory. Note: When you browse the Internet, web pages and pictures will be cached in your phone’s memory. This will allow quick access in the future. These are temporary files. Deleting these files can effectively increase the memory on the phone. Cookies are files of personal information and actions recorded by the website. Deleted cookies cannot be restored. 7.
End the Internet Connection On the Internet Sharing screen, press Disconnect. Set up the Phone as a Bluetooth Modem 1. On your phone, turn on Bluetooth and set it to visible mode. 2. Initiate a Bluetooth partnership from your phone, see “Pair a Bluetooth Device” in Section 7.4. 3. Select Start > Organiser & Tools > Internet Sharing. 4. In the PC Connection list, choose Bluetooth PAN. 5. In the Network Connection list, choose the connection that your phone uses to connect to the Internet. 6.
vice versa.
Off: Bluetooth is turned off. In this mode, you can neither send nor receive information using Bluetooth. Visible: Bluetooth is turned on, and all other Bluetooth-enabled devices within range can detect your phone. Turn On or Off Bluetooth on Your Phone 1. On the Home screen, select Start > Settings > Connections > Bluetooth. 2. On Bluetooth Devices screen select Menu > Turn On Bluetooth. 3. To turn off Bluetooth on your phone, select Menu > Turn Off Bluetooth. Make Your Phone Visible 1.
device to accept the partnership. Tip: You must enter the same Passcode on the pairing devices to complete the matching procedure. 4. When the devices are paired, a message will appear on you phone. Press Done to confirm. 5. Select the new device. You could edit and enter a display name for that device, then press Next. 6. Select the checkboxes of services that you want to use from the paired device and press Done. 7.5 Windows Live ™ Windows Live™ gives you full Internet experience on your phone.
1. Select Start > Entertainment > Windows Live. 2. Select Sign in to Windows Live. 3. On the next screen, select the links to read the Windows Live Term of Use and the Microsoft Privacy Statement. After reviewing it, press Accept. 4. Enter your Windows Live Mail or Hotmail address and password, then press Next. 5. Choose whether to show Windows Live’s search bar and applications on the Home screen, then press Next. 6. Choose what information you want to synchronize online with your phone.
Live Messenger lets you send and receive instant messages online. With this mobile version of Windows Live Messenger, you enjoy many of the same cool features that you get from the desktop version.
1. To sign in, select Sign in on the messenger screen. 2. If this is the first time you sign in, a message appears to inform you that your messenger contacts will be added to the contact list on your phone. Press OK to add them. It may take several minutes to sign in, depending on your connection speed. 3. To sign out, select Menu > Sign out. Your status changes to Offline. Add Windows Live Contacts You can add new Windows Live contacts in Live Messenger or in Contacts.
1. In the messenger, select the contact and select Menu > Contact options > Remove contact. 2. Choose whether to block the contact. 3. Choose whether to delete the contact from your Windows Live contact list. 4. Press OK. Send Instant Messages You can send instant messages with emoticons, and even send a voice clip. While chatting, you can send and receive files directly on a message window.
To send an instant message with emoticons 1. Select a contact and start a conversation. 2. Enter your text message in the text entry area of the message screen. 3. To add an emoticon, select Menu > Add emoticon, and then select an icon from the list of emoticons. 4. Press Send. Tip: To send a file, select Menu > Send. You can choose to send a picture, voice clip or any file. To invite one or more contacts to the conversation, select Menu > Options > Add participant. To send a voice message 1.
• Select Options to see more settings. 7.7 GPS Your phone has a built-in GPS module to support basic GPS operation and 3rd party navigation software. Guidelines and Preparation for Using GPS With a GPS receiver, you can quickly and accurately get the latitude, and the longitude of a position from GPS satellite signals. Note: The GPS signal cannot pass through solid non-transparent objects.
Refer to the documentation that came with your GPS software application for more information. Note: If you are interested in purchasing expanding GPS navigation software to use on your phone, check with the GPS software supplier (before you purchase, download, or install any GPS navigation software) to determine that the application is compatible with Windows Mobile 6.1.
8 More Applications 8.1 File Explorer File Explorer provides many easy-to-use features for file and folder management. Start File Explorer On the Home screen, select Start > File Explorer. File Explorer displays the entire file structure in your phone’s memory. The functions focus primarily on folder management. When initially started, File Explorer is in List View by default. To switch between views, select Menu > View > Icons or List.
4. Press Send. Note: You can also send the file via MMS. See Section 3 for Messaging. • Beam: Send the selected file via Bluetooth. • Edit: Open a menu where you can choose to cut, copy, paste, delete or rename a file. You can also create a new folder. • Properties: Show information about the selected folder or file. • View: Open a menu where you can switch between the Icons or List view. • Sort By: Open a menu where you can choose to sort the files or folders by Name, Date, Size or Type.
• Microsoft® Office PowerPoint® Mobile allows you to view Microsoft PowerPoint slides. • Microsoft® Office OneNote® Mobile allows you to create OneNote documents to include pictures and recordings. 8.3 Microsoft® Office Word® Mobile Microsoft® Office Word Mobile enables you to edit and view your Word documents and text files. Open Word Mobile On the Home screen, select Start > Office Mobile > Word Mobile. Note: Word Mobile does not fully support all features of Microsoft Word.
To change the zoom ratio When a document is opened, press View and then on the menu, select the zoom ratio to use. Select View > Wrap to Window to adjust the text flow so that the text wraps based on the screen size. In this way, you do not need to scroll right to read long paragraphs or sentences. Note: Text in tables cannot be wrapped. To change scrolling preference When a document is opened, select Menu > Scroll Up/Down and then select By Page or By Line. To find a word in a document 1.
Edit and Send Documents In order to edit Word documents or text files, you need to switch to Edit mode. To switch to Edit mode, when the document is opened, select Menu > Edit. To type words into the document 1. In the document, use the Navigation keys to position the cursor where you want to insert the text. 2. Type in the text using the QWERTY keyboard. Tip: Select Menu > Format to change the font format. You can use Bold, Italic, Underline, and Highlight.
3. In the e-mail, the file is automatically appended as an attachment. 4. Enter the recipient name and press Send. 8.4 Microsoft® Office Excel® Mobile Microsoft® Office Excel® Mobile enables you to edit and view your Excel worksheets. Open Excel Mobile Select Start > Office Mobile > Excel Mobile. Note: Excel Mobile does not fully support all features of Microsoft Excel. Some data and formatting may be lost when you save the workbook on your phone. View Worksheets To open a file 1.
To view the contents of a cell Sometimes the text in a cell cannot be fully displayed onscreen. To view the text in the cell in its entirety, select the cell and then select View > Cell Text. To use Freeze Pane 1. Select the cell that is after and below the row and column you want to freeze. For example, if you want to freeze column E and row 4, you should select cell F5. 2. Select View > Freeze Panes. To unfreeze the panes, select View > Unfreeze Panes.
2. Type in the text and press Done. To delete the cell content Select the cell whose content you want to delete, and select Menu > Edit > Clear Cell. Tip: You can select multiple cells by selecting Menu > Select, and choosing what to select in the worksheet. To change the cell range of a defined name If your worksheet contains defined names created in Microsoft Excel on the PC, you can change the cell range of a defined name. 1. Select Menu > Edit > Define Name…. 2.
2. Select the cell(s) where you want to copy the cell contents to and select Menu > Edit > Paste. To insert a row or column Select the cell where you want to insert a row or column and then select Menu > Insert > Row or Column. If you insert a row, the row will be inserted above the selected cell; if you insert a column, the column will be inserted at the left of the selected cell. Tip: You can also shift the contents of a row or column.
To send the document through e-mail 1. Select Menu > File > Send…. 2. In the Messaging screen, select the e-mail account you want to use to send the worksheet. 3. In the e-mail, the file is automatically appended as an attachment. 4. Enter the recipient name and press Send. 8.5 Microsoft® Office PowerPoint® Mobile Microsoft® Office PowerPoint® Mobile enables you to view your PowerPoint presentations. Open PowerPoint Mobile Select Start > Office Mobile > PowerPoint Mobile. View PPT Files To open a file 1.
To go through the slides of the presentation Press the Right key to go through the slides of the presentation; press the Left key to go back to the previous action or slide of the presentation. You can also go to a particular slide in your presentation. Press the Right Soft key to show the Menu. Select Menu > Go to Slide, and then choose the slide to go to. To view a custom show You can view custom shows that you create on Microsoft PowerPoint on your phone. 1. Press the Right Soft key to show Menu. 2.
3. Press the OK key to activate the hyperlink. If there is more than one hyperlink on the slide, use the Navigation keys to select the hyperlink you want to activate. To end the presentation Press the Left/Right Soft key (to show End) and then press End.
9 Synchronization You can synchronize information between your phone and your PC or between your phone and Microsoft® Exchange Sever. Before synchronizing information, please install ActiveSync on the PC. Once you install ActiveSync on your PC, you will be prompted to connect your phone and create a synchronization relationship with the device by using a USB cable or Bluetooth connection.
9.2 Choosing Your Synchronization Type Synchronize with a USB Cable Connection You can connect your phone with other devices via a USB cable. You can manually change the connection settings as follow. The new settings will be used when you connect your device to the PC next time. 1. Select Start > Organiser & Tools > ActiveSync. 2. Select Menu > Connections. 3. Choose USB in the drop-down menu and check Synchronize all PCs using this connection.
5. When finished, select Menu > Disconnect Bluetooth. Note: To preserve battery power, turn off Bluetooth when it is not in use. 9.3 Using ActiveSync tools Once you’ve established the connection partnership between your phone and the other device, you can start synchronization. The information you can synchronize includes contact information, calendar appointments, media files and e-mail messages, etc.
Synchronize E-mails You can synchronize e-mails on you phone with e-mails on your PC or Microsoft® Exchange Sever. For more information on synchronization, see ActiveSync Help on the PC. To set up an Exchange Server connection Before you can start to synchronize with or access information from the Exchange Server, you need to set up an Exchange Server connection on your phone.
7. Press Finish. Note: If you have synchronized e-mails with your PC before, open ActiveSync on your device and select Menu > Add Server Source to set up an Exchange Server connection. When you're prompted to select information types for synchronization, you need to clear the E-mail check box under the Windows PC item first before you can select the E-mail check box under Exchange Server. Tip: To change Exchange Server settings, open ActiveSync then select Menu > Configure Server.
10 Specifications Dimension Approx. 113 mm × 65.4 mm × 14.5 mm Weight Approx. 130 g (with battery) Bearer GRPS and EDGE support Main Display dimension，resolution, color space 2.5', 320*240, 65K color Camera Sensor Type CMOS Still Image Capture Resolution 1.3M Pixel Total internal memory (end user available) in MB Approx. 64MBytes for user Removable memory card Support MicroSD card Maximum Capacity of memory card 4GB Battery Capacity 1100 mAh Standby time Approx.
11 Troubleshooting This section describes how to troubleshoot some problems when they occur to your phone. Why can’t I turn on my phone as I press the power key? Either you didn’t press the key long enough, or the phone has shut down because the battery power level is too low. Please recharge the battery. What can I do as my phone displays “Enter PIN“ when it is switched on? Input the PIN or input the new PIN if you have changed the code. The code can be set “off” if you do not want to input.
12 Attachments Declaration of RoHS Compliance To minimize the environmental impact and take more responsibility to the earth we live, this document shall serve as formal declaration that the (Name of Products) manufactured by ZTE CORPORATION are in compliance with the Directive 2002/95/EC of the European Parliament - RoHS (Restriction of Hazardous Substances) with respect to the following substances: （1）Lead (Pb) （2）Mercury (Hg) （3）Cadmium (Cd) （4）Hexavalent Chromium (Cr (VI)) （5）Polybrominated Biphenyls (P
2002/95/EC may negate RoHS compliance of the assembly. To guarantee compliance of the assembly, the need for compliant product must be communicated to ZTE CORPORATION in written form. This declaration is issued based on our current level of knowledge. Since conditions of use are outside our control, ZTE CORPORATION makes no warranties, express or implied, and assumes no liability in connection with the use of this information. Disposal of your old appliance 1.
Copyright © 2008 ZTE CORPORATION All Rights Reserved Your Vodafone Smartphone is made exclusively for Vodafone by ZTE CORPORATION. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of ZTE CORPORATION. Trademarks VODAFONE and the Vodafone logos are trademarks of the Vodafone Group. Notice The information in this manual is subject to change without notice.
