Owner`s manual

9
Connecting the Power
Before connecting the power cord make sure that the PV-1800’s power switch is switched off.
What you will need:
•
AC Power Cord (included)
•
Surge protector/power strip.
Note:
VocoPro recommends that you use a surge protector to prevent permanent damage to
Note: VocoPro recommends that you use a surge protector to prevent permanent damage to Note:
your speakers, caused by a power surge.
1. Connect the correct end of the power cord to the AC input on the PV-1800’s rear panel
2. Connect the 3-pronged end to a 3-pronged out let on a surge protector or wall outlet
Connecting a Player or Mixer
Connecting to the
RCA
LINE IN Channel
What you will need:
•
Player or Mixer with RCA Left and Right (red &
white) audio outputs
•
L/R (red & white) stereo RCA audio cables
1. Connect one end of each RCA cable to the L/R (red & White) RCA outputs on your player or mixer
2. Connect the other ends of the RCA cables to the L/R (red & white) LINE IN RCA inputs on the PV-1800’s
rear panel





Getting Connected