User Manual
Table Of Contents
- Table Of Contents
- TABLE OF CONTENTS 1
- Contact Information
- Using the Online Help System
- #
- a
- b
- c
- d
- e
- f
- g
- h
- i
- j
- k
- l
- m
- n
- o
- p
- q
- r
- s
- t
- u
- v
- w
- x
- y
- z
- Hardware
- Access Points
- Bar Code Readers
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Portable Printers
- Remote Listening Systems
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Visual Training Devices
- Wired Portable Speakers
- Learning Zone
- Solution Zone
- Other Issues
- Equipment Problems
- Other Problems
- I can't get an assignment.
- I can't get my battery on.
- I can't get my battery off.
- I can't hear anything through the headset.
- I can't log on.
- I can't unplug my headset.
- I don't know what to say next.
- My bar code reader won't scan.
- My battery keeps falling off.
- My belt doesn't fit.
- My equipment is broken.
- My headset won't stay on.
- The Talkman terminal beeps every few seconds.
- The Talkman terminal does not appear in Terminal Manager.
- The Talkman terminal does not recognize a word.
- The Talkman terminal does not hear anything I say.
- The Talkman terminal does not respond to button presses.
- The Talkman terminal heard something I did not say.
- The Talkman terminal is telling me there are errors.
- The Talkman terminal keeps shutting off.
- The Talkman terminal makes clicking noises.
- The Talkman terminal makes static noises.
- The Talkman terminal will not load a task.
- The Talkman terminal will not load an operator template.
- The Talkman Terminal will not turn on.
- Sending Equipment Back for Repairs: Return Material Authorization (RMA) Procedures
- Other Issues
- Training Zone
- Working Zone
- Adding a Terminal to the Network
- Purpose
- Procedure
- Purpose
- Procedure
- Purpose
- Procedures
- Assembling a Talkman® OPEN Battery Housing
- Caring for Headsets & Microphones
- Purpose
- Procedures
- Changing Configurable Parameters
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Conditioning a Talkman® OPEN Battery
- Configurable Parameters
- Speech Recognition Parameters
- Configuring a Terminal
- Configuring Remote Listening Systems
- Purpose
- Before You Begin
- Procedures
- Configuring Visual Training Devices
- Creating Operator Voice Templates (enrollment training)
- Erasing Spoken Responses
- Purpose
- Before You Begin
- Procedure
- Troubleshooting
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Putting a Terminal to Sleep
- Purpose
- Procedure
- Removing a Talkman® T2 Terminal from a Belt
- Purpose
- Procedure
- Repeating Prompts
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Talkman® Terminals & Terminal Chargers
- Turning Off a Talkman® Terminal
- Turning On a Talkman® Terminal
- Using a Talkman® Terminal
- Purpose
- Procedures
- Using a Terminal During Each Shift
- Troubleshooting
- Using Bar Code Readers
- Waking a Terminal Up
- Purpose
- Procedures
98
1. Locate the yellow connection port on the terminal. This port is the one with the
yellow arrow above it on the terminal.
2. Hold the headset's connector so that its release lever is on the bottom.
3. Tilt the connector and insert the top of it into the top slot of the terminal's yellow
connection port.
4. With the top slot in place, tilt the connector down onto the terminal until the
release lever snaps into place on the connection port.
To disconnect a headset from a terminal, perform the following steps:
1. Grasp the headset's connector.
Warning: Do not pull on the headset's cable.
2. Press the connector's release lever.
3. Tilt the bottom of the connector off the terminal.
4. Lift the connector up and off the terminal.
Connecting and Disconnecting Bar Code Readers
To connect a bar code reader to a terminal, perform the following steps:
1. Locate the blue connection port on the terminal. This port is the one with the blue
arrow above it on the terminal.
2. Hold the bar code reader's connector so that its release lever is on the bottom.
3. Tilt the connector and insert the top of it into the top slot of the terminal's blue
connection port.
4. With the top slot in place, tilt the connector down onto the terminal until the
release lever snaps into place on the connection port.
To disconnect a bar code reader from a terminal, perform the following steps:
1. Grasp the bar code reader's connector.
Warning: Do not pull on the bar code reader's cable.
2. Press the connector's release lever.
3. Tilt the bottom of the connector off the terminal.
4. Lift the connector up and off the terminal.
Connecting and Disconnecting Wired Portable Speakers
To connect a wired portable speaker to a terminal, perform the following steps:
1. Obtain a Talkman terminal audio cable. This cable is the one that has a red bend
relief above its connector and an audio jack on the other end.
Note: A wired portable speaker can also be connected to the terminal using either a
maintenance cable or a training cable.
2. Locate the red connection port on the terminal. This port is the one with the red
arrow above it on the terminal.
3. Hold the audio cable's connector so that its release lever is on the bottom.
4. Tilt the connector and insert the top of it into the top slot of the terminal's red
connection port.
5. With the top slot in place, tilt the connector down onto the terminal until the
release lever snaps into place on the connection port.
6. Plug the connector at the end of the wired portable speaker's audio cable into the
audio jack at the end of the cable.
To disconnect a wired portable speaker from a terminal, perform the following steps:
1. Grasp the connector at the end of the speaker's audio cable in one hand and grasp
the audio cable's audio jack in the other.
2. Pull the speaker's connector out of the audio cable's audio jack.
3. Grasp the audio cable's connector.
Warning: Do not pull on the audio cable itself.