User Manual
Table Of Contents
- Table Of Contents
- TABLE OF CONTENTS 1
- Contact Information
- Using the Online Help System
- #
- a
- b
- c
- d
- e
- f
- g
- h
- i
- j
- k
- l
- m
- n
- o
- p
- q
- r
- s
- t
- u
- v
- w
- x
- y
- z
- Hardware
- Access Points
- Bar Code Readers
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Portable Printers
- Remote Listening Systems
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Visual Training Devices
- Wired Portable Speakers
- Learning Zone
- Solution Zone
- Other Issues
- Equipment Problems
- Other Problems
- I can't get an assignment.
- I can't get my battery on.
- I can't get my battery off.
- I can't hear anything through the headset.
- I can't log on.
- I can't unplug my headset.
- I don't know what to say next.
- My bar code reader won't scan.
- My battery keeps falling off.
- My belt doesn't fit.
- My equipment is broken.
- My headset won't stay on.
- The Talkman terminal beeps every few seconds.
- The Talkman terminal does not appear in Terminal Manager.
- The Talkman terminal does not recognize a word.
- The Talkman terminal does not hear anything I say.
- The Talkman terminal does not respond to button presses.
- The Talkman terminal heard something I did not say.
- The Talkman terminal is telling me there are errors.
- The Talkman terminal keeps shutting off.
- The Talkman terminal makes clicking noises.
- The Talkman terminal makes static noises.
- The Talkman terminal will not load a task.
- The Talkman terminal will not load an operator template.
- The Talkman Terminal will not turn on.
- Sending Equipment Back for Repairs: Return Material Authorization (RMA) Procedures
- Other Issues
- Training Zone
- Working Zone
- Adding a Terminal to the Network
- Purpose
- Procedure
- Purpose
- Procedure
- Purpose
- Procedures
- Assembling a Talkman® OPEN Battery Housing
- Caring for Headsets & Microphones
- Purpose
- Procedures
- Changing Configurable Parameters
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Conditioning a Talkman® OPEN Battery
- Configurable Parameters
- Speech Recognition Parameters
- Configuring a Terminal
- Configuring Remote Listening Systems
- Purpose
- Before You Begin
- Procedures
- Configuring Visual Training Devices
- Creating Operator Voice Templates (enrollment training)
- Erasing Spoken Responses
- Purpose
- Before You Begin
- Procedure
- Troubleshooting
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Putting a Terminal to Sleep
- Purpose
- Procedure
- Removing a Talkman® T2 Terminal from a Belt
- Purpose
- Procedure
- Repeating Prompts
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Talkman® Terminals & Terminal Chargers
- Turning Off a Talkman® Terminal
- Turning On a Talkman® Terminal
- Using a Talkman® Terminal
- Purpose
- Procedures
- Using a Terminal During Each Shift
- Troubleshooting
- Using Bar Code Readers
- Waking a Terminal Up
- Purpose
- Procedures
73
8. Make sure the prongs are separated and completely seated in the square holes.
9. Place the battery section on top of the contact section so that the cut-out feature of
the battery section is away from you. The two complete holes on the battery section
and the two complete holes on the contact section should be lined up.
10. Firmly hold the two sections together and flip the housing over so that it is laying on
the battery side (see Image 4).
Image 4: Battery Housing Assembly Ready for Screws
11. Remove the four Torx screws from the plastic bag.
12. Insert the screws into the four holes and tighten them to secure the sections together.
Warning: Do not tighten the screws too much, or you may crack the plastic or strip
the screws.