User Manual

70
•
Purpose
•
Procedures
Purpose
This document explains how to adjust the volume of the voice that the Talkman® T2 terminal uses to issue
prompts to operators.
Procedures
Operators may adjust the volume using either:
•
Button Controls
•
Voice Controls
Button Controls
To adjust the volume using buttons, perform the following steps:
1. Make sure that the terminal is either on or sleeping.
The LED indicator should be either solid green or blinking green.
2.
Press the + button to make the voice louder, or the button to make the voice
quieter.
The terminal says "louder" when the + button is pressed and "softer" when the
button is pressed.
If the volume of the voice is at the loudest possible setting, the terminal will say,
"This is loudest." If the volume of the voice is at the softest possible setting, the
terminal will say, "This is softest."
Voice Controls
To adjust the volume using voice controls, perform the following steps:
1. Make sure the terminal is on.
The LED indicator should be green.
2. Say, "Talkman volume."
3. Say "louder" to make the voice louder, or "softer" to make it softer.
If the terminal says, "This is softest" or "This is loudest", you cannot make the volume any louder
or softer.
4.
When the voice is as loud or as soft as you want it, say, "Talkman continue" to
return to your task.