User Manual
Table Of Contents
- Table Of Contents
- TABLE OF CONTENTS 1
- Contact Information
- Using the Online Help System
- #
- a
- b
- c
- d
- e
- f
- g
- h
- i
- j
- k
- l
- m
- n
- o
- p
- q
- r
- s
- t
- u
- v
- w
- x
- y
- z
- Hardware
- Access Points
- Bar Code Readers
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Portable Printers
- Remote Listening Systems
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Visual Training Devices
- Wired Portable Speakers
- Learning Zone
- Solution Zone
- Other Issues
- Equipment Problems
- Other Problems
- I can't get an assignment.
- I can't get my battery on.
- I can't get my battery off.
- I can't hear anything through the headset.
- I can't log on.
- I can't unplug my headset.
- I don't know what to say next.
- My bar code reader won't scan.
- My battery keeps falling off.
- My belt doesn't fit.
- My equipment is broken.
- My headset won't stay on.
- The Talkman terminal beeps every few seconds.
- The Talkman terminal does not appear in Terminal Manager.
- The Talkman terminal does not recognize a word.
- The Talkman terminal does not hear anything I say.
- The Talkman terminal does not respond to button presses.
- The Talkman terminal heard something I did not say.
- The Talkman terminal is telling me there are errors.
- The Talkman terminal keeps shutting off.
- The Talkman terminal makes clicking noises.
- The Talkman terminal makes static noises.
- The Talkman terminal will not load a task.
- The Talkman terminal will not load an operator template.
- The Talkman Terminal will not turn on.
- Sending Equipment Back for Repairs: Return Material Authorization (RMA) Procedures
- Other Issues
- Training Zone
- Working Zone
- Adding a Terminal to the Network
- Purpose
- Procedure
- Purpose
- Procedure
- Purpose
- Procedures
- Assembling a Talkman® OPEN Battery Housing
- Caring for Headsets & Microphones
- Purpose
- Procedures
- Changing Configurable Parameters
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Conditioning a Talkman® OPEN Battery
- Configurable Parameters
- Speech Recognition Parameters
- Configuring a Terminal
- Configuring Remote Listening Systems
- Purpose
- Before You Begin
- Procedures
- Configuring Visual Training Devices
- Creating Operator Voice Templates (enrollment training)
- Erasing Spoken Responses
- Purpose
- Before You Begin
- Procedure
- Troubleshooting
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Putting a Terminal to Sleep
- Purpose
- Procedure
- Removing a Talkman® T2 Terminal from a Belt
- Purpose
- Procedure
- Repeating Prompts
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Talkman® Terminals & Terminal Chargers
- Turning Off a Talkman® Terminal
- Turning On a Talkman® Terminal
- Using a Talkman® Terminal
- Purpose
- Procedures
- Using a Terminal During Each Shift
- Troubleshooting
- Using Bar Code Readers
- Waking a Terminal Up
- Purpose
- Procedures
48
Learning Zone
LED Indicators
LED IndicatorsLED Indicators
LED Indicators
The following information lists the majority of the possible states of the LED indicator on the
Talkman® terminal. Click the link that best describes the state (blinking one color, flashing
between two colors, off, or solidly one color) and color (red, green, orange) of the indicator.
Try the steps in sequence, one at a time, until the problem is resolved. Do not skip one step in
favor of a later step. Do not continue with other steps once the problem is fixed. If the steps
listed do not solve the problem, contact Vocollect for technical support.
• Blinking green
• Blinking red
• Flashing green and orange
• Flashing red and green
• Flashing red and orange
• Off
• Solid green
• Solid orange
• Solid red
Blinking green
There are two ways that the terminal blinks green:
• Once a second: The terminal blinks green once a second when it is in sleep mode and
not in a terminal charger.
• Four times a second: The terminal blinks green four times a second when it has been
properly placed into a terminal charger.
The terminal can be removed from its charger when the LED indicator starts blinking green.
The LED indicator should blink green when the terminal sleeps (see Putting a Terminal to
Sleep). It should also blink green when a task is being selected (see Loading a Task onto a
Terminal). The terminal will also blink green during some parts of the firmware loading
process.
Warning: Do not remove the battery when the terminal is sleeping, or you may lose all of
the data that has been collected.
What to do if the terminal isn't blinking green while in a terminal
charger or when selecting a task
1. The terminal may be busy. Wait a minute to see if it starts blinking green.
2. Make sure the terminal has been properly placed into the terminal charger. See Placing
a Talkman Terminal into a Terminal Charger.
3. Clean the battery connector pins with a cleaning brush, then put the terminal back into
the terminal charger.
4. Reboot the terminal. See Rebooting a Terminal.
Blinking red
The indicator blinks red when changing operators using the operator button (see Loading an
Operator Template onto a Talkman Terminal). It also blinks red during a task load, or while the