User Manual
Table Of Contents
- Table Of Contents
- TABLE OF CONTENTS 1
- Contact Information
- Using the Online Help System
- #
- a
- b
- c
- d
- e
- f
- g
- h
- i
- j
- k
- l
- m
- n
- o
- p
- q
- r
- s
- t
- u
- v
- w
- x
- y
- z
- Hardware
- Access Points
- Bar Code Readers
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Portable Printers
- Remote Listening Systems
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Visual Training Devices
- Wired Portable Speakers
- Learning Zone
- Solution Zone
- Other Issues
- Equipment Problems
- Other Problems
- I can't get an assignment.
- I can't get my battery on.
- I can't get my battery off.
- I can't hear anything through the headset.
- I can't log on.
- I can't unplug my headset.
- I don't know what to say next.
- My bar code reader won't scan.
- My battery keeps falling off.
- My belt doesn't fit.
- My equipment is broken.
- My headset won't stay on.
- The Talkman terminal beeps every few seconds.
- The Talkman terminal does not appear in Terminal Manager.
- The Talkman terminal does not recognize a word.
- The Talkman terminal does not hear anything I say.
- The Talkman terminal does not respond to button presses.
- The Talkman terminal heard something I did not say.
- The Talkman terminal is telling me there are errors.
- The Talkman terminal keeps shutting off.
- The Talkman terminal makes clicking noises.
- The Talkman terminal makes static noises.
- The Talkman terminal will not load a task.
- The Talkman terminal will not load an operator template.
- The Talkman Terminal will not turn on.
- Sending Equipment Back for Repairs: Return Material Authorization (RMA) Procedures
- Other Issues
- Training Zone
- Working Zone
- Adding a Terminal to the Network
- Purpose
- Procedure
- Purpose
- Procedure
- Purpose
- Procedures
- Assembling a Talkman® OPEN Battery Housing
- Caring for Headsets & Microphones
- Purpose
- Procedures
- Changing Configurable Parameters
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Conditioning a Talkman® OPEN Battery
- Configurable Parameters
- Speech Recognition Parameters
- Configuring a Terminal
- Configuring Remote Listening Systems
- Purpose
- Before You Begin
- Procedures
- Configuring Visual Training Devices
- Creating Operator Voice Templates (enrollment training)
- Erasing Spoken Responses
- Purpose
- Before You Begin
- Procedure
- Troubleshooting
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Putting a Terminal to Sleep
- Purpose
- Procedure
- Removing a Talkman® T2 Terminal from a Belt
- Purpose
- Procedure
- Repeating Prompts
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Talkman® Terminals & Terminal Chargers
- Turning Off a Talkman® Terminal
- Turning On a Talkman® Terminal
- Using a Talkman® Terminal
- Purpose
- Procedures
- Using a Terminal During Each Shift
- Troubleshooting
- Using Bar Code Readers
- Waking a Terminal Up
- Purpose
- Procedures
42
5
Analog
Ground
6
Primary
Microphone
7
Boom Switch
8
Digital
Ground
9
Battery +
Maintenance Port
Pin
Function
1
Digital
Ground
2
+5 Volt
Output
3
Audio Line
Out
4
Analog
Ground
5
RXD
(receives
data into the
terminal)
6
TXD
(transmits
data from the
terminal)
7
Battery
Temperature
8
Digital
Ground
9
+12 Volt
Input
Bar Code Port
Pin
Function
1
Scanner ID
Input
2
+5 Volt
Output
3
Not Used
4
Not Used
5
RXD
(receives
data into the
terminal)
6
TXD
(transmits
data from the
terminal)
7
Not Used
8
Digital
Ground
9
Ground
Note: It is recommended that a brush similar to the one found at the following link be used