User Manual

25
single instance of an application.
q
QTERM-J10™: A device used to visually display information (such as vocabulary words during
enrollment training); a trademark of the QSI Corporation.
r
radio files: The firmware that is loaded onto a Talkman® terminal's radio card.
radio range: The area in which a Talkman® terminal stays in contact with an access point as
determined by a site survey. Talkman terminals have built-in radios through which information
is exchanged via an access point to and from the host computer.
RCM file: Recognizer script file. This type of file is created when a task is saved.
reported short: Occurs when there are not enough product units at a pick location for an
operator to fulfill a pick. This does not necessarily mean that the units are not in the
warehouse, just that they are not at the pick location. Reported shorts are also referred to as
scratches, exceptions, cuts, markouts, or redlines.
RF: Radio frequency.
ROM: Read-only memory.
RS-232C: A standard recommended by the Electronics Industries Association (EIA) concerning
the transmission of data between computers using serial ports. Most personal computers are
equipped with an RS-232-compatible serial port, to which external modems, printers, scanners,
and other peripheral devices can connect.
s
scratch: Occurs when there are not enough product units at a pick location for an operator to
fulfill a pick. This does not necessarily mean that the units are not in the warehouse, just that
they are not at the pick location. Scratches are also referred to as reported shorts, exceptions,
cuts, markouts, or redlines.
serial cable: A cable used to transmit serial data between two computers (or a computer and a
device such as a modem). Vocollect modifies serial cables so that one end has a standard serial
port connection to be connected to the COM port on the host computer and the other end has a
connection that connects to a Talkman® terminal.
serial port: A port that synchronizes and manages asynchronous communication between a
computer and devices such as serial printers, modems, and other computers.
short: Occurs when there are not enough product units at a pick location for an operator to