User Manual
Table Of Contents
- Table Of Contents
- TABLE OF CONTENTS 1
- Contact Information
- Using the Online Help System
- #
- a
- b
- c
- d
- e
- f
- g
- h
- i
- j
- k
- l
- m
- n
- o
- p
- q
- r
- s
- t
- u
- v
- w
- x
- y
- z
- Hardware
- Access Points
- Bar Code Readers
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Portable Printers
- Remote Listening Systems
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Overview
- Procedures
- Specifications
- Visual Training Devices
- Wired Portable Speakers
- Learning Zone
- Solution Zone
- Other Issues
- Equipment Problems
- Other Problems
- I can't get an assignment.
- I can't get my battery on.
- I can't get my battery off.
- I can't hear anything through the headset.
- I can't log on.
- I can't unplug my headset.
- I don't know what to say next.
- My bar code reader won't scan.
- My battery keeps falling off.
- My belt doesn't fit.
- My equipment is broken.
- My headset won't stay on.
- The Talkman terminal beeps every few seconds.
- The Talkman terminal does not appear in Terminal Manager.
- The Talkman terminal does not recognize a word.
- The Talkman terminal does not hear anything I say.
- The Talkman terminal does not respond to button presses.
- The Talkman terminal heard something I did not say.
- The Talkman terminal is telling me there are errors.
- The Talkman terminal keeps shutting off.
- The Talkman terminal makes clicking noises.
- The Talkman terminal makes static noises.
- The Talkman terminal will not load a task.
- The Talkman terminal will not load an operator template.
- The Talkman Terminal will not turn on.
- Sending Equipment Back for Repairs: Return Material Authorization (RMA) Procedures
- Other Issues
- Training Zone
- Working Zone
- Adding a Terminal to the Network
- Purpose
- Procedure
- Purpose
- Procedure
- Purpose
- Procedures
- Assembling a Talkman® OPEN Battery Housing
- Caring for Headsets & Microphones
- Purpose
- Procedures
- Changing Configurable Parameters
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Conditioning a Talkman® OPEN Battery
- Configurable Parameters
- Speech Recognition Parameters
- Configuring a Terminal
- Configuring Remote Listening Systems
- Purpose
- Before You Begin
- Procedures
- Configuring Visual Training Devices
- Creating Operator Voice Templates (enrollment training)
- Erasing Spoken Responses
- Purpose
- Before You Begin
- Procedure
- Troubleshooting
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Purpose
- Before You Begin
- Procedure
- Putting a Terminal to Sleep
- Purpose
- Procedure
- Removing a Talkman® T2 Terminal from a Belt
- Purpose
- Procedure
- Repeating Prompts
- Purpose
- Before You Begin
- Procedure
- Purpose
- Procedure
- Talkman® Terminals & Terminal Chargers
- Turning Off a Talkman® Terminal
- Turning On a Talkman® Terminal
- Using a Talkman® Terminal
- Purpose
- Procedures
- Using a Terminal During Each Shift
- Troubleshooting
- Using Bar Code Readers
- Waking a Terminal Up
- Purpose
- Procedures
138
Note: The information in this topic applies specifically to the Talkman® T2
system. To view this information for the Talkman® OPEN system, click on
the image of the terminal.
• Purpose
• Procedures
Purpose
This document describes the proper methods of putting on and removing headsets, as well routine
maintenance for the care of headsets and microphones. For more information on headsets and microphones,
refer to Headsets, Microphones, Windscreens, & Earpieces and Caring for Headsets & Microphones.
Procedures
• Wearing the headset
• Removing the headset
Wearing the Headset
To wear a headset, perform the following steps:
1. Put the headset on and adjust the ear pad(s) to a comfortable position.
2.
Place the microphone at the corner of your mouth, about 1/4" away from the
face, out of the direct flow of your breath.
Note: Make sure that there is a windscreen on the microphone. Not using a
windscreen reduces the performance of the Talkman® T2 system.
Note: There is a dot on the microphone. This dot should be positioned so that it
faces your mouth.
3. Clip the headset wire to your collar, below and behind the ear piece connected to the wire.
4. Let the wire fall down your back, and clip it to the belt near the terminal.
5. Locate the yellow connection port on the terminal. This port is the one with the yellow arrow
above it on the terminal.
6. Hold the headset's connector so that its release lever is on the bottom.
7. Tilt the connector and insert the top of it into the top slot of the terminal's yellow connection
port.
8. With the top slot in place, tilt the connector down onto the terminal until the release lever
snaps into place on the connection port.
Removing the Headset
To remove a headset, perform the following steps:
1. Grasp the headset's connector.
Warning: Do not pull on the headset's cable.
2. Press the connector's release lever.
3. Tilt the bottom of the connector off of the terminal.
4. Lift the connector up and off the terminal.
5. Unclip the headset wire from your collar and belt.
6. Being careful with microphone boom, remove the headset from your head.